Icetubs IceBath Thermowood & Stainless Steel Cold Plunge Tub
Icetubs IceBath Thermowood & Stainless Steel Cold Plunge Tub
- Regular price
- $11,495.00
- Regular price
- Sale price
- $11,495.00
- Unit price
- per
Found it lower? We'll match it, before or after you buy.
Send us a link showing the lower price. If it is the same model, new and in stock at an authorized U.S. online retailer, we match it. We reply within one business day.
Already ordered? You have 30 days and we refund the difference. Your full manufacturer warranty and authorized service stay intact either way.
We compare total delivered cost including freight. Marketplaces, warehouse clubs, open box, refurbished and clearance items, and promotional pricing are excluded, and we cannot go below a manufacturer's minimum advertised price.
Read the full price match terms →A plunge you lie flat in, raked 60 degrees at the head end.
- 304 stainless trough, engine in its own housing
- Standard or XL, 88.9″ or 96″ overall, one bather
- 79 to 83 lb per sq ft filled, deck friendly
304 grade stainless with a Thermowood inlay that lifts out, so the pan underneath can be tipped and wiped. Both sizes fit any IceBath or IceBarrel, so this is a choice of how much floor you cover.
Icetubs names salts, chlorine, bromine, magnesium, shock doses, flocculants and homemade mixtures as warranty exclusions, because they corrode stainless steel. Approved water treatment is a condition of cover, so this is worth adding with the tub rather than after.
Icetubs asks for a new filter monthly in private use and weekly in light professional use, and a fitted working filter is a condition of the warranty. Changing one takes seconds.
Ships with six star screws and a mini star screwdriver. Fits any IceBath or IceBarrel.
Couldn't load pickup availability
Shipping & Delivery
Shipping & Delivery
Every Icetubs cold plunge ships free to the contiguous 48 states. These are freight shipments, not parcel: the lightest crate on the range leaves the warehouse at 375 pounds and the heaviest at 474, so the tub and its cooling engine travel palletized on an LTL carrier, by appointment, to the curb. Call (888) 500-5675 if you want the delivery method for your exact model confirmed before you order.
Free freight to the lower 48. The price you see is the price you pay anywhere in the contiguous 48 states. Canada is 490 dollars, set by Icetubs and the same wherever you buy. Alaska, Hawaii and Puerto Rico are quoted case by case, so contact us before ordering.
Scheduling your delivery. The carrier calls the number on your order to arrange an appointment window, and someone has to be there to sign. Curbside is the standard: the driver lowers the pallet to ground level on a liftgate and stops there. A 400 pound crate does not go up a drive or through a side gate on the driver's time, so arrange help, or add Professional Setup and Assembly at checkout and a crew will unpack it, assemble it, position it on site and take the packaging away.
Measure the route before the truck comes. The IceBath XL is eight feet long, and the IceBarrel XL is 40 inches across the tub. Check the path from where a truck can stop to where the tub will sit, gate widths and any turn included, before you order rather than after.
Inspect before you sign. Check the crate and the engine carton with the driver still there and write any damage on the delivery receipt before you sign. Icetubs requires visible transport damage recorded on the delivery document at the moment of delivery and reported within 24 hours with photographs, and hidden damage has the same window. A clean signature lets the carrier treat the goods as delivered in good condition, which can end a claim before it starts, so open everything on delivery day even if you are not filling the tub for weeks.
Accessories. Drip trays, filter sets, the phone holder and AquaFinesse water care are parcel items and go out with your tub order rather than separately.
Lead times. Icetubs stock for this market moves through a US distributor and most models ship promptly. We confirm the position for your model when you order rather than publishing an average.
Questions before you order? We are here Monday to Saturday, 9am to 6pm EST.
Free freight applies to the contiguous 48 states. See our general shipping policy for terms that apply across the store.
Warranty
Warranty
Icetubs covers its cold plunges against manufacturing defects and component failures for two years in private use and six months in light professional use, from the date you take delivery. Cover runs with the product's serial number, so keep your invoice. We open and manage the claim for you.
Freezing weather is a condition, not a suggestion. With the engine running the tub can sit in ambient temperatures down to 23°F; with the engine off the floor is 34°F. Between the two the engine has to run on automatic around the clock. Below 23°F the engine must be detached and stored indoors and the tub drained. Skipping either step is a named exclusion, and a burst pipe is the failure it prevents.
Water care and filters are conditions too. AquaFinesse is the only approved treatment; salts, chlorine, bromine, shock doses and homemade mixtures are named exclusions. Filters must be replaced monthly in private use and weekly in light professional use, and the engine must never run without water or a filter fitted.
What is not covered. Filters, AquaFinesse, the ozone generator and the water pump. Labor, travel and call-out charges, even when the part itself is covered. Cosmetic damage from misuse, natural weathering of the Thermowood, improper transport or relocation, unauthorized repair, and corrosion on a tub sited within 10 miles of the coast.
How a claim is settled. Icetubs does not send technicians. Either a replacement part is shipped to you with instructions and remote support, or the component is collected free of charge and returned repaired. A replaced part carries the remainder of the original term.
If it arrives damaged, the clock is 24 hours. Note the damage on the delivery document before you sign and report it within 24 hours with photographs, visible or hidden. Other defects should be reported within two months of discovery, or 14 days for a business user.
Light professional use. The six month term covers a business where the tub is not the primary revenue generating equipment, such as a small studio, clinic or office, and use is capped at 15 people a day. A dedicated cold plunge studio falls outside this warranty entirely, so tell us before you order.
How to make a claim. Call (888) 500-5675 or email sales@recoveryroomdirect.com with your order number, the serial number and a description of the fault. Photographs or a short video help.
This summary reflects the Icetubs published warranty and service terms for cold plunges. The manufacturer's written document governs any claim.
Return Policy
Return Policy
If an Icetubs cold plunge is not right, you have 30 days from the date of purchase to return it. All return communication is handled by our team at Recovery Room Direct. You do not need to contact the manufacturer or the distributor yourself.
Condition required. New, unused and resalable, with the original crating, the engine carton and all included parts. Once the tub has been filled and the engine has run it counts as used and cannot be returned. Keep the crate until you are certain you are keeping it, because a 400 pound tub cannot travel safely without it.
How to start a return. Call (888) 500-5675 or email sales@recoveryroomdirect.com with your order number. A Return Authorization number is required before anything goes back, and product returned without one can be refused.
What a return costs. Full credit for the product, less a repackaging fee that typically runs about 20 to 50 dollars. There is no percentage restocking fee on a standard customer return.
Who pays the freight. You do on a change of mind, and return freight on a crated cold plunge is a real number rather than a formality, so ask us for a figure before you commit. Because these ship free, the outbound freight we paid is also deducted from a change of mind refund. When the cause is shipping damage or an error on our side, we cover the return and nothing is deducted.
Damaged on arrival is a different process, and the clock is 24 hours. Note the damage on the delivery receipt before you sign, photograph the crate and contents before you move anything, and call us the same day. Icetubs requires damage reported within 24 hours with photographs or video, visible or hidden. Transport damage is resolved with replacement parts rather than by returning the tub.
Cancelling before it ships. Call us as early as you can. Before we submit the order to the distributor there is no fee. After we submit it but before it ships, a small administrative fee may apply, and we waive it whenever we are not charged.
Accessories and water care. Same 30 day window and the same condition requirement. An opened bottle of AquaFinesse and an opened filter set are consumables and are not returnable.
Refunds are issued to the original payment method once the return is received and inspected. See our general refund policy for terms that apply across the store.
PRODUCT DESCRIPTION
Jump to 14 sections
The short answer
The one you lie down in, with a backrest at the head end
The Icetubs IceBath is a full length plunge with a 304 stainless interior, a backrest raked at 60 degrees and a 1 HP cooling engine that stands at the foot end in its own housing. You get in and out like a bathtub rather than climbing over a rim. Three things decide whether it suits you, and the first one is the reason most people rule it in or out.
The ground
7.4 or 8 ft long
88.9 inches on the standard and 96 on the XL, engine included. The tub itself is 66.1 or 73.2 inches of that.
The person
Lying flat
23.2 inches wide inside on the standard, 26.6 on the XL. One bather, reclined against a 60 degree backrest.
The floor
79 to 83 lb per sq ft
Filled, with a bather. A third of what an upright IceBarrel puts down, which is why this is the deck friendly one.
Fit
The two numbers that decide it: length outside, width inside
You need between seven and eight feet of clear run, and you need to be comfortable in a tub 23 or 27 inches wide. Everything else about this decision is easier than those two.
| Standard / XL | |
| Overall length | 88.9 in / 96 in, engine included |
| Tub length | 66.1 in / 73.2 in |
| Inner width | 23.2 in / 26.6 in |
| Overall width | 27.5 in / 31.8 in |
| Height | 25.2 in / 28.1 in |
| Water | 106.7 gal / 132.1 gal |
| Backrest | 60 degrees on both |
The XL is 7.1 inches longer, 3.4 inches wider inside and 2.9 inches taller, and it holds 25 gallons more. If you are over about six feet, or broad across the shoulders, or you simply do not want to feel the sides, go XL. If the space is tight, the standard is the one that fits.
Icetubs IceBath XL, the longer one
The XL is the same tub stretched in every direction: 96 inches overall against 88.9, a 73.2 inch tub within that against 66.1, 26.6 inches wide inside against 23.2, and 28.1 inches tall against 25.2. It holds 132.1 gallons against 106.7 and weighs 397 pounds empty against 342. Same 304 stainless interior, same 60 degree backrest, same engine, same warranty. Choose it if you are tall, broad, or simply do not want to feel the sides, and check you have eight feet of clear run before you do.
Why lying down changes the session
In an upright barrel you sit and brace. In an IceBath you lie back against the rake and let go, which is the difference the rake is there to make. It also means your legs are fully under, which they are not in a seated tub unless you fold them. The rim is only 25 inches off the ground on the standard, so getting in is a step over a low edge rather than a climb, and it is the lowest rim in the range to get back over on cold legs.
The tradeoff is floor space. An IceBath wants the seven to eight foot run that an upright barrel does not. If the space you have is a corner rather than a wall, look at the IceBarrel or the IceBarrel XL.
Before you order
Six checks before a 390 or 445 pound crate arrives
390 pounds on the standard, 445 on the XL. Every one of these is cheap to solve now and awkward to solve once the pallet is on your driveway.
- Eight feet of clear run, and the route to get there.96 inches on the XL, 88.9 on the standard. Measure from where a truck can stop to where the tub will sit, including every gate and turn. This is the longest product in the Icetubs range and the one access most often defeats.
- A grounded outlet on a circuit that can carry 14.5 amps.The engine's maximum draw at 110 volts. Icetubs requires a grounded outlet with GFCI protection from the main panel, on a breaker that meets local regulations. Have an electrician confirm it before you order.
- A surface that does not hold moisture.Concrete, pavers or timber decking. Icetubs rules out bare soil and synthetic grass, because moisture wicks up into the Thermowood.
- Deck load, if it is going on a deck.Filled with a bather, Icetubs gives this as 83 pounds per square foot on the standard and 79 on the XL. That is the lightest in the range and the reason this is the model people put on decks. Decks and upper floors are still built to a specified load, so have your deck builder or a structural engineer confirm the structure can carry it.
- Twenty inches of clear air at the engine end.The engine sits at the foot end and dumps heat into the air, so that end cannot be pushed against a wall. Icetubs asks for 50 cm of clearance and an air outlet unobstructed by at least 20 inches.
- Distance to the nearest chlorinated pool, and to the sea.Icetubs says not to site these next to a chlorinated pool, and that within 12 miles of the sea you need to rinse the stainless rim and hardware with fresh water every few days. Separately, corrosion on a tub sited within 10 miles of the coast is a named warranty exclusion.
- Whether your winter goes below 23°F.If it does, there is a mandatory shutdown routine and it is a warranty condition. Read section 06 first.
Not sure on any of them? Call (888) 500-5675 and we will walk the list with you before you order.
Construction
Three things about the IceBath you cannot change later
The interior is 304 stainless steel. Not a plastic insert, not a liner. It does not stain or hold odour, and a damp microfibre cloth is all the routine cleaning it needs. It is also why the chemistry rules are strict: chlorine, bromine and salts pit stainless, so they are named warranty exclusions rather than discouraged.
The engine sits in line at the foot end, not off to one side. On the barrels it is a separate box standing next to the tub. Here it butts up against the foot end in its own stainless housing with a slatted Thermowood top, which is why the published length is 88.9 inches for a 66.1 inch tub. The practical difference is that it reads as one object rather than two. It still needs its 20 inches of clear air at that end.
The shell is thermally modified wood. Heat, not chemistry. Baking drives the moisture and resin out, which is what lets it stand outdoors through freeze and thaw without the movement untreated softwood shows. It silvers in sunlight, and Icetubs excludes that weathering from the warranty. Normal for the material, worth knowing in advance.
This is a plumbing free cold plunge that holds its own temperature. If you are still weighing a tub with a built in engine against a tub plus a separate chiller, compare the cold plunges with chillers we carry, or browse the full Icetubs range.
The ozone generator and the water pump are not covered by the warranty. Icetubs lists both as non warranted components alongside the filters and the water care. The tub and the cooling engine are covered for two years in private use. Those two parts are not, and it is easy to miss because it sits in the warranty terms rather than on the spec sheet.
The decision that blocks the purchase
What the IceBath needs from your electrics
The same 1 HP engine as every other tub in the range: 110 volts, and 14.5 amps when it is working hardest. That last number is the one to take to an electrician, because it is more than a lot of household circuits should be asked to carry on their own.
| Power supply | 110 V / 60 Hz |
|---|---|
| Maximum current | 14.5 A |
| Maximum power input | 1.7 kW |
| Typical power consumption | 1.35 kW while running |
| Protection | Grounded outlet, GFCI protected from the main panel |
| Cooling capacity | 2.18 kW measured, 2 to 3.2 kW range |
| Noise | 60 dB(A) at 1 m, about 3 ft |
Why we are not calling this a standard outlet load. You will see these tubs described that way. At 14.5 amps it is a heavy continuous draw for a shared household circuit, and Icetubs' own instruction is a grounded outlet protected by a GFCI breaker in the main panel, on a circuit breaker that meets local regulations. We would rather give you the number and let a licensed electrician set the rating, so plan on a dedicated circuit.
The power cable carries its own breaker in a box part way along it, which trips on a leakage fault or a short. That box has to stay dry, so outdoors it needs protecting from rain along with the engine.
What the engine actually does
Cools to 37.4°F, set on the engine panel or from the Icetubs app over Wi-Fi. Icetubs also sells a heater option that takes the same engine up to 100.4°F; it is specified with the tub rather than added later, so call us before you order if you want it. The pump moves 55 liters a minute, turning the tub over roughly every seven minutes on the standard and every nine on the XL, through a 5 micron filter, while a built in ozone generator at 200 to 300 milligrams an hour breaks down organic contaminants as it goes. That is what keeps the water usable for weeks rather than days.
The rule that catches people out
Winter, and the two temperature thresholds
A cold plunge in a cold climate sounds like the easy case. It is the opposite. Icetubs sets two different ambient limits depending on whether the engine is running, and getting them wrong is a named warranty exclusion rather than a judgement call.
| 34°F and above | Normal. The engine can be switched off |
|---|---|
| 23°F to 34°F | The engine must run in automatic mode, around the clock, with no timers, so it holds the water above freezing |
| Below 23°F | Detach the engine and store it indoors. Drain the tub and leave it empty |
| Above 104°F | Outside the engine's operating range in either direction |
Read that middle row again. Between 23 and 34 degrees you cannot simply switch it off for a week while you travel: the engine has to keep running on automatic so the water never freezes, and a burst pipe is explicitly not covered. Every tub in our outdoor cold plunge range has some version of this constraint. Icetubs publishes theirs as two hard thresholds rather than general advice.
Below 23 degrees it is a proper shutdown: engine off, disconnected, brought inside, tub drained. On this model that is 107 or 132 gallons to move, so think about where the water will go before you decide where the tub sits. Most of the northern United States sees nights below that through a normal winter, so for many buyers this is a seasonal tub with a storage routine rather than a year round one. What is not reasonable is finding it out in January.
And the other end of the range, which matters in a hot state
104°F is a ceiling, not a guideline. Icetubs gives the engine an operating air range of 23°F to 104°F with it running, and running it in air above 104°F is a named warranty exclusion in the same clause as the freeze rules. An engine that overheats and stops is not covered.
There is a second thing worth knowing before a Phoenix or Las Vegas summer. The 2.18 kW cooling figure is measured with ambient air up to 86°F, inlet water at 68°F and 50 percent humidity. Icetubs does not publish what the engine delivers at 100°F ambient, and a heat pump moving heat into hotter air always delivers less. So expect a longer pull down and more running time through a desert summer, plan the 20 inches of clearance on the shaded side if you have a choice, and tell us your climate before you order so we are not guessing at it either.
If your winters go below 23°F, tell us before you order. There are places to put an engine that make the shutdown a ten minute job and places that make it an annual argument. Call (888) 500-5675.
Running cost
What the IceBath costs to run
Two honest figures and one honest gap. We would rather give you the arithmetic we can stand behind than a monthly number we made up.
First cool down
$0.90
106.7 gallons from about 68°F to 37.4°F on the standard. The XL is $1.12 for 132.1 gallons
Time to get there
4 to 5 hours
From tap water in mild conditions, on 2.18 kW of cooling. Nearer 4 on the standard, nearer 5 on the XL
If it never cycled
$5.94
A day, if it ran continuously at its typical 1.35 kW draw. It does not, so read this as a ceiling rather than a cost
The arithmetic: 400 liters through a 17°C drop is about 7.9 kilowatt hours of heat to remove, and the engine makes 2.18 kW of cooling for 1.35 kW of electricity, so call it 4.9 kilowatt hours on the standard and 6.1 on the XL. Costed at 18.34 cents per kilowatt hour, the US residential average in the EIA's Electric Power Monthly for June 2026.
The gap is the holding cost, and Icetubs does not publish it. They say only that the engine needs very little power once the water is at temperature, and that in automatic mode it cycles infrequently because the insulated cover holds the cold well. Neither is a kilowatt hour figure. What we can tell you is that the true number sits somewhere between nothing and the ceiling above, and closer to the bottom of that range than the top, because a covered tub at temperature is asking the engine for very little. If you buy one and will read a meter for us over a month, we will publish the real figure with your name on it.
The running cost people forget
Filters. A new one monthly in private use and weekly in light professional use, and a fitted working filter is a warranty condition. Three come with the tub, so plan on two replacement sets in the first year at home. AquaFinesse is the other consumable, and the only treatment Icetubs approves. Between the ozone system and the treatment you are not draining and refilling weekly, which is where the water bill would otherwise go.
Scope
What arrives, and what you still need
One freight shipment, 390 pounds on the standard and 445 on the XL, delivered curbside off a liftgate. Everything the tub needs to run is in it apart from water and a circuit.
- The IceBathThermowood shell, 304 stainless interior, 60 degree backrest
- The cooling engine and its protector coverstands at the foot end in its own housing
- Two engine connectors and four rubber seals
- Insulated Thermo cover in two sections, four clips and four screwsso you lift half of a five and a half foot lid at a time
- Three 5 micron filters
- Gardena garden hose attachment set
- Installation and operation manual
Required before it runs
- A grounded, GFCI protected circuit14.5 A at 110 V. Get an electrician to confirm the rating
- A level surface that does not hold moistureConcrete, pavers or decking
- A garden hose within reachThere is no plumbing. You fill it and drain it by hose
- AquaFinesse water careThe only treatment Icetubs approves, and a condition of the warranty
Optional
- Professional Setup and AssemblyA professional crew unpacks, assembles and positions everything on site, then takes the packaging away. You do not lift or build a thing
- Drip trayThe large one suits the length of an IceBath
- Phone holderStainless, and the cover still fits with it mounted
- Replacement filter sets
- Where to find themAll four are in the buy together block near the top of this page, including the AquaFinesse the warranty requires
Freight is included to the contiguous 48. Canada is a set rate, and Alaska, Hawaii and Puerto Rico are quoted case by case.
Setup
Getting the IceBath running
There is nothing to build. The tub arrives assembled. What you are doing is positioning it, connecting the engine loop, filling it and purging the air, and the last of those is the step people rush.
- Position the tub and the engine together, then level both.The engine's inlet and outlet have to line up with the connections on the water loop. There are adjustable feet under both. Level it empty, because moving it filled is not an option at 1,400 pounds, or 1,676 on the XL. On a tub this long a floor that slopes even slightly shows in the water line.
- Connect the two engine connectors with their rubber sealsto the lower inlet and the upper outlet, then fit a filter on the lower inlet before you fill. The engine must never run dry or without a filter, and neither is covered.
- Purge the air before you set a temperature.Once the water reaches the upper outlet, hold the garden hose against the upper outlet and then the lower inlet separately to push the trapped air out of the loop. Air in the circuit is the usual reason a new tub sounds wrong and cools slowly, and it is five minutes of work to prevent.
What Icetubs asks of you in the water
Worth reading their own user guidance before the first session rather than after. Icetubs asks for sessions of one to three minutes and a five minute maximum, your head completely above water at all times, entering and leaving slowly rather than jumping in, and never using the tub alone. Children under twelve only with close adult supervision, shorter times and warmer water. And they ask you to speak to a doctor first if you have a heart, circulatory or respiratory condition, uncontrolled high blood pressure, epilepsy or a fainting disorder, or if you are pregnant. It is all set out in section 8 of the operational manual that ships with the tub.
Before the first session
Plug the engine in and check the breaker box on the cable hangs clear of the ground and out of standing water. Set the temperature on the panel or pair the app, then leave it. From tap water, expect four to five hours, and let it hold the set temperature for a full cycle before you get in.
Or add Professional Setup and Assembly in the buy box above and a professional crew unpacks, assembles and positions everything on site, then takes the packaging away. On a tub this size it is worth considering.
Reference
Icetubs IceBath and IceBath XL specifications
| IceBath / IceBath XL | |
| Footprint | 27.5 × 88.9 in / 31.8 × 96 in |
| Inner width | 23.2 in / 26.6 in |
| Water capacity | 106.7 gal / 132.1 gal |
| Floor loading, filled | 83 lb per sq ft / 79 lb per sq ft |
| Cooling range | To 37.4°F · 100.4°F needs the heater option |
| Power | 110 V / 60 Hz, 14.5 A maximum, on both |
| Shipping weight | 390 lb / 445 lb |
Full specification tables
| Overall | 88.9 × 27.5 × 25.2 in / 96 × 31.8 × 28.1 in |
|---|---|
| Tub length within that | 66.1 in / 73.2 in |
| Height with the cover on | 28.8 in / 31.7 in |
| Inner width | 23.2 in (590 mm) / 26.6 in (676 mm) |
| Backrest rake | 60 degrees on both |
| Cooling engine | At the foot end, 23 in high. 21.3 in wide × 23.1 in deep on the standard; Icetubs publishes only the 22.8 in of length it adds on the XL |
| Empty weight | 342 lb / 397 lb, engine included |
| Filled, with one bather | approx. 1,400 lb / 1,676 lb |
| Floor loading | 83 lb per sq ft / 79 lb per sq ft |
| Volume | 106.7 gal (400 L) standard, 132.1 gal (500 L) XL |
|---|---|
| Circulation | 55 L/min, full turnover roughly every 7 to 9 minutes |
| Filter | Replaceable 5 micron cartridge, three supplied |
| Ozone | Built in generator, 200 to 300 mg/h output |
| Water treatment | AquaFinesse only. Chlorine, bromine and salts are excluded |
| Plumbing | None. Garden hose fill, drain valve |
| Engine | 1 HP, 110 V / 60 Hz, 14.5 A max, 1.7 kW max input, 14 AWG |
|---|---|
| Cooling | 2.18 kW measured, R32 refrigerant |
| Control | Engine panel or the Icetubs app over Wi-Fi |
| Noise | 60 dB(A) at 1 m (about 3 ft) |
| Clearance | 50 cm around the engine, air outlet clear by 20 in |
| Ambient range | 23°F to 104°F engine on, 34°F to 104°F engine off |
| Warranty | 2 years private use, 6 months light professional. Ozone generator and water pump excluded |
| Delivery | Free LTL freight to the contiguous 48, curbside off a liftgate |
Choosing within the range
Icetubs IceBath against the rest of the range
Same engine in all of them, same water care, same warranty. What changes is the posture you plunge in, how much room you get, and what it does to your floor.
| IcetubsIceBathYou are here | IcetubsIceBath XLAlso here | IcetubsIceBarrel | IcetubsIceBarrel XL | |
|---|---|---|---|---|
| Posture | Lying flat | Lying flat | Seated upright | Seated upright |
| Interior | 304 stainless | 304 stainless | 304 stainless | Fiberglass |
| Room inside | 23.2 in wide | 26.6 in wide | 26.8 in across | 35.1 in across |
| Footprint | 27.5 × 88.9 in | 31.8 × 96 in | 30.6 × 53 in | 40.2 × 62.3 in |
| Water | 106.7 gal | 132.1 gal | 92.5 gal | 113.6 gal |
| Floor loading | 83 lb/sq ft | 79 | 250 | 170 |
| Stairs option | No | No | Yes | Yes |
Two rows decide most of these. If you want to lie down, you are on the right page and the only question is which size. If you would rather sit up and save about three feet of floor, look at the barrels. Still deciding between cold water and a chamber? Our cryotherapy versus cold plunge comparison sets out the difference, or call us.
Independent reports
What we can and cannot tell you yet
Icetubs is new to our range and we have not sold enough to have reviews of our own. We are not going to borrow anyone else's.
The figure to weigh on this model
79 to 83 pounds per square foot filled, a third of what an upright barrel puts down. That is the only reason a plunge this size is a deck conversation at all, and the cost of it is the seven and a half to eight feet of run it needs.
What is easy to miss
The electrics in section 05, the two winter thresholds in section 06 and the 104°F ceiling beside them. All three sit in the warranty terms rather than on a spec sheet, and all three are conditions of cover.
What we are still collecting
Real standby consumption through a winter, and how the shutdown routine works out in practice for owners in cold states. If you buy one and will tell us, we will publish it.
One thing worth knowing about the manual. The manual supplied with these tubs carries the European electrical specification, 220 to 230 volts at 50 hertz. The engine built for this market is the 110 volt, 60 hertz version drawing 14.5 amps, which is what the cooling unit documentation and the US distributor data both give. Same tub, different regional specification, so read the amperage off this page rather than off that section.
Buyer questions
Icetubs IceBath, questions buyers ask before ordering
Icetubs IceBath or IceBath XL, how do I choose?
Length and shoulder room. The XL is 96 inches overall against 88.9, and 26.6 inches wide inside against 23.2. It also holds 25 gallons more and stands 2.9 inches taller. If you are over about six feet, broad across the shoulders, or you do not want to feel the sides, go XL and make sure you have eight feet of clear run. If the space is tight, the standard fits where the XL will not. Both use the same engine, the same cover design and the same warranty.
Does the published length include the engine?
Yes, and this is the number people get wrong. The 88.9 inches on the standard is the tub plus the cooling engine at the foot end, where the tub itself is 66.1 inches. On the XL it is 96 inches overall for a 73.2 inch tub. Plan for the full figure, and add about 20 inches of clear air at the engine end for the airflow, because that end cannot be pushed against a wall.
Does it really plug into a standard household outlet?
It plugs into a grounded outlet, but the load is 14.5 amps at 110 volts when the engine is pulling hard, a heavy continuous draw for a shared household circuit. Icetubs asks for a grounded outlet protected by a GFCI breaker in the main panel, on a breaker that meets local regulations. Plan on a dedicated circuit and have a licensed electrician set the rating.
Can I leave the Icetubs IceBath outside through a freezing winter?
Only within limits, and they are warranty conditions rather than advice. Down to 34°F you can switch the engine off. Between 23°F and 34°F it must run in automatic mode around the clock so the water never freezes. Below 23°F you detach it, store it indoors and drain the tub. A burst pipe is specifically not covered. Section 06 has the full table.
Will the Icetubs IceBath go on my deck?
This is the model to ask that about, because it is the lightest in the range per square foot. Filled with a bather, Icetubs gives the standard as 83 pounds per square foot and the XL as 79, against 250 for an upright IceBarrel. Decks and upper floors are still built to a specified load, and a figure like this is concentrated over the tub's own footprint rather than spread across the deck, so have your deck builder or a structural engineer confirm the structure can carry it before you order rather than after.
How long does it take to cool down, and what does that cost?
From tap water at around 68°F down to 37.4°F, expect about four hours on the standard and nearer five on the XL in mild conditions. That is roughly 4.9 kilowatt hours of electricity on the standard and 6.1 on the XL, or about 90 cents and $1.12 at the current US residential average. Holding temperature costs far less because the engine cycles, but Icetubs publishes no standby figure and we are not going to invent one.
How heavy is the cover, and can one person manage it?
The cover comes in two sections with webbing handles rather than as one full length lid, so you lift half at a time. On the standard the tub it spans is 66.1 inches, five and a half feet, and that split is the reason a full length plunge is practical to use alone. It clips to the rim with four clips, and the height with the cover on is 28.8 inches on the standard and 31.7 on the XL.
Who fixes the IceBath if the engine fails?
We open the claim, you deal with us. Icetubs does not send technicians. They either ship a replacement part with instructions and remote support, or arrange free collection of the component, repair or replace it and return it. Engines are usually collected. Labor for removing and refitting is excluded, as are the ozone generator and the water pump. A replaced part carries the remainder of the original term rather than starting a fresh one. Full terms are on our Icetubs warranty policy page.
Can I use it in a gym or a clinic?
Yes, on six months of cover rather than two years. Icetubs defines light professional use as a business where the tub is not the primary revenue generating equipment, which they give as a small studio, clinic or office, and filters go weekly there. A dedicated cold plunge studio, where the tub is the business, falls outside this warranty entirely and needs separate commercial terms. Tell us before you order if that is you, and see the rest of our commercial cold plunges if you are comparing.
Note also that the published limits of fifteen bathers a day and three an hour are a condition of the warranty in any use, private or professional, not only commercial.
What happens if it arrives damaged?
Note it on the delivery receipt before you sign, photograph everything before you move it, and call us the same day on (888) 500-5675. This one is genuinely time sensitive: Icetubs requires visible transport damage recorded on the delivery document at delivery and reported within twenty four hours with photographs, and hidden damage has the same window. A clean signature lets the carrier treat the goods as delivered in good condition. A fault that appears later runs on a different clock: Icetubs asks a consumer to report a defect within two months of discovering it, and a business user within fourteen days.
One last thing
Measure the run, then settle the circuit
Ten minutes on the phone covers the three things that are expensive to get wrong: whether eight feet fits where you want it, whether your circuit can carry 14.5 amps, and where the engine goes so a winter shutdown is a ten minute job.
ChaddyCold therapy specialistMon to Sat, 9am to 6pm EST
Complete Your Recovery Setup
The add-ons our customers choose most.
