Icetubs IceBarrel XL Thermowood & Fiberglass Cold Plunge Tub
Icetubs IceBarrel XL Thermowood & Fiberglass Cold Plunge Tub
- Regular price
- $11,995.00
- Regular price
- Sale price
- $11,995.00
- Unit price
- per
Found it lower? We'll match it, before or after you buy.
Send us a link showing the lower price. If it is the same model, new and in stock at an authorized U.S. online retailer, we match it. We reply within one business day.
Already ordered? You have 30 days and we refund the difference. Your full manufacturer warranty and authorized service stay intact either way.
We compare total delivered cost including freight. Marketplaces, warehouse clubs, open box, refurbished and clearance items, and promotional pricing are excluded, and we cannot go below a manufacturer's minimum advertised price.
Read the full price match terms →An upright plunge 35.1 inches across inside, the widest here.
- Moulded fiberglass insert, not stainless like the rest
- 113.6 gallons, one bather, room to move your arms
- 1 HP cooling engine included, no chiller to match
304 grade stainless with a Thermowood inlay that lifts out, so the pan underneath can be tipped and wiped. Both sizes fit any IceBath or IceBarrel, so this is a choice of how much floor you cover.
Icetubs names salts, chlorine, bromine, magnesium, shock doses, flocculants and homemade mixtures as warranty exclusions, because they corrode stainless steel. Approved water treatment is a condition of cover, so this is worth adding with the tub rather than after.
Icetubs asks for a new filter monthly in private use and weekly in light professional use, and a fitted working filter is a condition of the warranty. Changing one takes seconds.
Ships with six star screws and a mini star screwdriver. Fits any IceBath or IceBarrel.
Couldn't load pickup availability
Shipping & Delivery
Shipping & Delivery
Every Icetubs cold plunge ships free to the contiguous 48 states. These are freight shipments, not parcel: the lightest crate on the range leaves the warehouse at 375 pounds and the heaviest at 474, so the tub and its cooling engine travel palletized on an LTL carrier, by appointment, to the curb. Call (888) 500-5675 if you want the delivery method for your exact model confirmed before you order.
Free freight to the lower 48. The price you see is the price you pay anywhere in the contiguous 48 states. Canada is 490 dollars, set by Icetubs and the same wherever you buy. Alaska, Hawaii and Puerto Rico are quoted case by case, so contact us before ordering.
Scheduling your delivery. The carrier calls the number on your order to arrange an appointment window, and someone has to be there to sign. Curbside is the standard: the driver lowers the pallet to ground level on a liftgate and stops there. A 400 pound crate does not go up a drive or through a side gate on the driver's time, so arrange help, or add Professional Setup and Assembly at checkout and a crew will unpack it, assemble it, position it on site and take the packaging away.
Measure the route before the truck comes. The IceBath XL is eight feet long, and the IceBarrel XL is 40 inches across the tub. Check the path from where a truck can stop to where the tub will sit, gate widths and any turn included, before you order rather than after.
Inspect before you sign. Check the crate and the engine carton with the driver still there and write any damage on the delivery receipt before you sign. Icetubs requires visible transport damage recorded on the delivery document at the moment of delivery and reported within 24 hours with photographs, and hidden damage has the same window. A clean signature lets the carrier treat the goods as delivered in good condition, which can end a claim before it starts, so open everything on delivery day even if you are not filling the tub for weeks.
Accessories. Drip trays, filter sets, the phone holder and AquaFinesse water care are parcel items and go out with your tub order rather than separately.
Lead times. Icetubs stock for this market moves through a US distributor and most models ship promptly. We confirm the position for your model when you order rather than publishing an average.
Questions before you order? We are here Monday to Saturday, 9am to 6pm EST.
Free freight applies to the contiguous 48 states. See our general shipping policy for terms that apply across the store.
Warranty
Warranty
Icetubs covers its cold plunges against manufacturing defects and component failures for two years in private use and six months in light professional use, from the date you take delivery. Cover runs with the product's serial number, so keep your invoice. We open and manage the claim for you.
Freezing weather is a condition, not a suggestion. With the engine running the tub can sit in ambient temperatures down to 23°F; with the engine off the floor is 34°F. Between the two the engine has to run on automatic around the clock. Below 23°F the engine must be detached and stored indoors and the tub drained. Skipping either step is a named exclusion, and a burst pipe is the failure it prevents.
Water care and filters are conditions too. AquaFinesse is the only approved treatment; salts, chlorine, bromine, shock doses and homemade mixtures are named exclusions. Filters must be replaced monthly in private use and weekly in light professional use, and the engine must never run without water or a filter fitted.
What is not covered. Filters, AquaFinesse, the ozone generator and the water pump. Labor, travel and call-out charges, even when the part itself is covered. Cosmetic damage from misuse, natural weathering of the Thermowood, improper transport or relocation, unauthorized repair, and corrosion on a tub sited within 10 miles of the coast.
How a claim is settled. Icetubs does not send technicians. Either a replacement part is shipped to you with instructions and remote support, or the component is collected free of charge and returned repaired. A replaced part carries the remainder of the original term.
If it arrives damaged, the clock is 24 hours. Note the damage on the delivery document before you sign and report it within 24 hours with photographs, visible or hidden. Other defects should be reported within two months of discovery, or 14 days for a business user.
Light professional use. The six month term covers a business where the tub is not the primary revenue generating equipment, such as a small studio, clinic or office, and use is capped at 15 people a day. A dedicated cold plunge studio falls outside this warranty entirely, so tell us before you order.
How to make a claim. Call (888) 500-5675 or email sales@recoveryroomdirect.com with your order number, the serial number and a description of the fault. Photographs or a short video help.
This summary reflects the Icetubs published warranty and service terms for cold plunges. The manufacturer's written document governs any claim.
Return Policy
Return Policy
If an Icetubs cold plunge is not right, you have 30 days from the date of purchase to return it. All return communication is handled by our team at Recovery Room Direct. You do not need to contact the manufacturer or the distributor yourself.
Condition required. New, unused and resalable, with the original crating, the engine carton and all included parts. Once the tub has been filled and the engine has run it counts as used and cannot be returned. Keep the crate until you are certain you are keeping it, because a 400 pound tub cannot travel safely without it.
How to start a return. Call (888) 500-5675 or email sales@recoveryroomdirect.com with your order number. A Return Authorization number is required before anything goes back, and product returned without one can be refused.
What a return costs. Full credit for the product, less a repackaging fee that typically runs about 20 to 50 dollars. There is no percentage restocking fee on a standard customer return.
Who pays the freight. You do on a change of mind, and return freight on a crated cold plunge is a real number rather than a formality, so ask us for a figure before you commit. Because these ship free, the outbound freight we paid is also deducted from a change of mind refund. When the cause is shipping damage or an error on our side, we cover the return and nothing is deducted.
Damaged on arrival is a different process, and the clock is 24 hours. Note the damage on the delivery receipt before you sign, photograph the crate and contents before you move anything, and call us the same day. Icetubs requires damage reported within 24 hours with photographs or video, visible or hidden. Transport damage is resolved with replacement parts rather than by returning the tub.
Cancelling before it ships. Call us as early as you can. Before we submit the order to the distributor there is no fee. After we submit it but before it ships, a small administrative fee may apply, and we waive it whenever we are not charged.
Accessories and water care. Same 30 day window and the same condition requirement. An opened bottle of AquaFinesse and an opened filter set are consumables and are not returnable.
Refunds are issued to the original payment method once the return is received and inspected. See our general refund policy for terms that apply across the store.
PRODUCT DESCRIPTION
Jump to 14 sections
The short answer
An upright plunge 35.1 inches across inside, in fiberglass
The Icetubs IceBarrel XL is an upright tub for one person with a molded fiberglass interior 35.1 inches across, 113.6 gallons of water and a 1 HP cooling engine that stands beside it. You fill it with a garden hose and plug it in. Three things decide whether it suits you.
The ground
40 × 62 in
The tub is 40.2 inches across. The 62.3 inches is tub plus engine side by side, and the engine wants about 20 inches of clear air beyond that.
The person
35.1 in inside
The most room of any Icetubs model. One bather, seated upright, with room to move your arms rather than hold them in.
The floor
170 lb per sq ft
Filled, with a bather. The lightest load per foot of any upright Icetubs, because a 40.2 inch base spreads the water over 72 percent more floor.
Fit
35.1 inches across, and the interior is fiberglass
Those are the two things that separate this from the standard IceBarrel. The interior is 8.3 inches wider, which is the difference between sitting still and being able to move. And the tub itself is a fiberglass insert rather than stainless steel.
| Interior diameter | 35.1 in (903 mm) · 8.3 in more than the standard IceBarrel |
|---|---|
| Seating depth | 25.8 in (655 mm) from the seat to the rim, slightly shallower than the standard |
| Interior | Fiberglass insert, not stainless steel |
| Water | 113.6 gallons (430 liters) |
| Capacity | One bather per session |
Note the seating depth is 25.8 inches here against 26.5 on the standard barrel. You are sitting in a wider, marginally shallower tub rather than a bigger one in every direction. If shoulder room is what you are after, this is the one. If you want maximum depth in the smallest footprint, the standard IceBarrel is still the answer.
Why the Icetubs IceBarrel XL is fiberglass and the others are stainless
Fiberglass is a common shell material in this category, and Icetubs describes the insert on this model as lightweight and highly insulating. On floor loading, note that the XL is the heavier tub at 373 pounds empty against 326, and it still comes out at 170 pounds per square foot against the standard barrel's 250, because a 40.2 inch base covers 72 percent more floor than a 30.6 inch one.
What stainless gives you instead is a surface that will not stain, will not hold odour and will not scratch in ordinary use, and a look that reads as more premium in a room. Both are covered by the same two year warranty. If the interior material matters to you more than the extra 8.3 inches, look at the standard IceBarrel or the IceBath, which are both 304 stainless.
The stairs are a variant, not an accessory
Choose the XL with stairs and you get two steps and two handrails in Thermowood and stainless, mounted so the lower step sits over the cooling engine. They add 8.1 inches to the footprint and 5.8 inches to the height, taking it to 70.4 inches long and 52.2 inches tall. Without them you are stepping over a 46 inch rim. They cannot be added later as a separate part from us, so choose now.
Before you order
Six checks before a 421 pound crate arrives
Every one of these is cheap to solve now and awkward to solve once the pallet is on your driveway.
- A grounded outlet on a circuit that can carry 14.5 amps.The engine's maximum draw at 110 volts. Icetubs requires a grounded outlet with GFCI protection from the main panel, on a breaker that meets local regulations. Have an electrician confirm it before you order.
- Forty inches of clear width to get it through.The tub alone is 40.2 inches across, which is what has to pass a gate or a doorway, and the footprint with the engine is 62.3 inches long once it is in place. Measure the route from where a truck can stop to where it will sit, gates included, before you order.
- A surface that does not hold moisture.Concrete, pavers or timber decking. Icetubs rules out bare soil and synthetic grass, because moisture wicks up into the Thermowood.
- Floor loading, if it is going indoors or on a deck.Filled with a bather, Icetubs gives this as 170 pounds per square foot, or 176 with the stairs. Lighter than the standard IceBarrel, but decks and upper floors are built to a specified load, so have your deck builder or a structural engineer confirm the structure can carry it.
- Twenty inches of clear air around the engine.It dumps the heat it pulls from the water into the air, so it cannot sit in an alcove. Icetubs asks for 50 cm of clearance and an air outlet unobstructed by at least 20 inches.
- Distance to the nearest chlorinated pool, and to the sea.Icetubs says not to site these next to a chlorinated pool, and that within 12 miles of the sea you need to rinse the stainless rim and hardware with fresh water every few days. Separately, corrosion on a tub sited within 10 miles of the coast is a named warranty exclusion.
- Whether your winter goes below 23°F.If it does, there is a mandatory shutdown routine and it is a warranty condition. Read section 06 first.
Not sure on any of them? Call (888) 500-5675 and we will walk the list with you before you order.
Construction
Three things about the IceBarrel XL you cannot change later
A fiberglass tub inside a Thermowood shell. The insert is molded to fit the shell rather than dropped into it, and Icetubs describes it as lightweight and highly insulating. The rim and the visible hardware are stainless, so it still reads as an Icetubs from across the yard.
The shell is thermally modified wood. Heat, not chemistry. Baking drives the moisture and resin out, which is what lets it stand outdoors through freeze and thaw without the movement untreated softwood shows. It silvers in sunlight, and Icetubs excludes that weathering from the warranty. Normal for the material, worth knowing in advance.
The engine is a separate box, and it shows. It stands beside the tub and connects with two hoses, which is why the footprint is 62.3 inches long for a tub 40.2 inches across. A failed engine gets collected and replaced rather than the tub being written off. The tradeoff is that it is visible, 23 inches tall, and makes 60 decibels measured at one meter, about three feet.
This is a plumbing free cold plunge that holds its own temperature. If you are still weighing a tub with a built in engine against a tub plus a separate chiller, compare the cold plunges with chillers we carry, or browse the full Icetubs range.
The ozone generator and the water pump are not covered by the warranty. Icetubs lists both as non warranted components alongside the filters and the water care. The tub and the cooling engine are covered for two years in private use. Those two parts are not, and it is easy to miss because it sits in the warranty terms rather than on the spec sheet.
The decision that blocks the purchase
What the IceBarrel XL needs from your electrics
The same 1 HP engine as every other tub in the range: 110 volts, and 14.5 amps when it is working hardest. That last number is the one to take to an electrician, because it is more than a lot of household circuits should be asked to carry on their own.
| Power supply | 110 V / 60 Hz |
|---|---|
| Maximum current | 14.5 A |
| Maximum power input | 1.7 kW |
| Typical power consumption | 1.35 kW while running |
| Protection | Grounded outlet, GFCI protected from the main panel |
| Cooling capacity | 2.18 kW measured, 2 to 3.2 kW range |
| Noise | 60 dB(A) at 1 m, about 3 ft |
Why we are not calling this a standard outlet load. You will see these tubs described that way. At 14.5 amps it is a heavy continuous draw for a shared household circuit, and Icetubs' own instruction is a grounded outlet protected by a GFCI breaker in the main panel, on a circuit breaker that meets local regulations. We would rather give you the number and let a licensed electrician set the rating, so plan on a dedicated circuit.
One thing worth noting on this model: it is the same engine and the same cooling capacity as the standard IceBarrel, working on 23 percent more water. That shows up as a longer first cool down rather than a warmer tub, and section 07 has the arithmetic.
What the engine actually does
Cools to 37.4°F, set on the engine panel or from the Icetubs app over Wi-Fi. Icetubs also sells a heater option that takes the same engine up to 100.4°F; it is specified with the tub rather than added later, so call us before you order if you want it. The pump moves 55 liters a minute, turning the whole 113.6 gallons over roughly every eight minutes through a 5 micron filter, while a built in ozone generator at 200 to 300 milligrams an hour breaks down organic contaminants as it goes. That is what keeps the water usable for weeks rather than days.
The rule that catches people out
Winter, and the two temperature thresholds
A cold plunge in a cold climate sounds like the easy case. It is the opposite. Icetubs sets two different ambient limits depending on whether the engine is running, and getting them wrong is a named warranty exclusion rather than a judgement call.
| 34°F and above | Normal. The engine can be switched off |
|---|---|
| 23°F to 34°F | The engine must run in automatic mode, around the clock, with no timers, so it holds the water above freezing |
| Below 23°F | Detach the engine and store it indoors. Drain the tub and leave it empty |
| Above 104°F | Outside the engine's operating range in either direction |
Read that middle row again. Between 23 and 34 degrees you cannot simply switch it off for a week while you travel: the engine has to keep running on automatic so the water never freezes, and a burst pipe is explicitly not covered. Every tub in our outdoor cold plunge range has some version of this constraint. Icetubs publishes theirs as two hard thresholds rather than general advice.
Below 23 degrees it is a proper shutdown: engine off, disconnected, brought inside, tub drained. On this model that means 113.6 gallons to move and a 23 inch engine box to carry, so think about drainage and about where the engine will live before you decide where the tub goes. Most of the northern United States sees nights below that through a normal winter.
And the other end of the range, which matters in a hot state
104°F is a ceiling, not a guideline. Icetubs gives the engine an operating air range of 23°F to 104°F with it running, and running it in air above 104°F is a named warranty exclusion in the same clause as the freeze rules. An engine that overheats and stops is not covered.
There is a second thing worth knowing before a Phoenix or Las Vegas summer. The 2.18 kW cooling figure is measured with ambient air up to 86°F, inlet water at 68°F and 50 percent humidity. Icetubs does not publish what the engine delivers at 100°F ambient, and a heat pump moving heat into hotter air always delivers less. So expect a longer pull down and more running time through a desert summer, plan the 20 inches of clearance on the shaded side if you have a choice, and tell us your climate before you order so we are not guessing at it either.
If your winters go below 23°F, tell us before you order. There are places to put an engine that make the shutdown a ten minute job and places that make it an annual argument. Call (888) 500-5675.
Running cost
What the IceBarrel XL costs to run
Two honest figures and one honest gap. We would rather give you the arithmetic we can stand behind than a monthly number we made up.
First cool down
$0.97
Taking 113.6 gallons from about 68°F to 37.4°F, roughly 5.3 kilowatt hours
Time to get there
4 to 5 hours
From tap water in mild conditions, on 2.18 kW of cooling
If it never cycled
$5.94
A day, if it ran continuously at its typical 1.35 kW draw. It does not, so read this as a ceiling rather than a cost
The arithmetic: 430 liters through a 17°C drop is about 8.5 kilowatt hours of heat to remove, and the engine makes 2.18 kW of cooling for 1.35 kW of electricity, so call it 5.3 kilowatt hours for the first pull down. Costed at 18.34 cents per kilowatt hour, the US residential average in the EIA's Electric Power Monthly for June 2026. The standard IceBarrel does it in three to four hours for 79 cents, holding 21 gallons less.
The gap is the holding cost, and Icetubs does not publish it. They say only that the engine needs very little power once the water is at temperature, and that in automatic mode it cycles infrequently because the insulated cover holds the cold well. Neither is a kilowatt hour figure. What we can tell you is that the true number sits somewhere between nothing and the ceiling above, and closer to the bottom of that range than the top, because a covered tub at temperature is asking the engine for very little. If you buy one and will read a meter for us over a month, we will publish the real figure with your name on it.
The running cost people forget
Filters. A new one monthly in private use and weekly in light professional use, and a fitted working filter is a warranty condition. Three come with the tub, so plan on two replacement sets in the first year at home. AquaFinesse is the other consumable, and the only treatment Icetubs approves. Between the ozone system and the treatment you are not draining and refilling weekly, which is where the water bill would otherwise go.
Scope
What arrives, and what you still need
One freight shipment, 421 pounds, delivered curbside off a liftgate. 474 pounds if you chose the stairs. Everything the tub needs to run is in it apart from water and a circuit.
- The IceBarrel XLThermowood shell, fiberglass interior
- The cooling engine and its protector cover
- Two engine connectors and four rubber sealsthe hose loop between tub and engine
- Insulated Thermo cover XL, four clips and four screws
- Three 5 micron filters
- Gardena garden hose attachment set
- Installation and operation manual
- On the stairs variant: two steps, two handrails and fourteen screws
Required before it runs
- A grounded, GFCI protected circuit14.5 A at 110 V. Get an electrician to confirm the rating
- A level surface that does not hold moistureConcrete, pavers or decking
- A garden hose within reachThere is no plumbing. You fill it and drain it by hose
- AquaFinesse water careThe only treatment Icetubs approves, and a condition of the warranty
Optional
- Professional Setup and AssemblyA professional crew unpacks, assembles and positions everything on site, then takes the packaging away. You do not lift or build a thing
- Drip trayCatches the water that leaves with you
- Phone holderStainless, and the cover still fits with it mounted
- Replacement filter sets
- Where to find themAll four are in the buy together block near the top of this page, including the AquaFinesse the warranty requires
Freight is included to the contiguous 48. Canada is a set rate, and Alaska, Hawaii and Puerto Rico are quoted case by case.
Setup
Getting the IceBarrel XL running
There is nothing to build. The tub arrives assembled. What you are doing is positioning it, connecting two hoses, filling it and purging the air, and the last of those is the step people rush.
- Position the tub and the engine together, then level both.The engine's inlet and outlet have to line up with the connections on the water loop. There are adjustable feet under both. Level it empty, because moving it filled is not an option at 1,497 pounds.
- Connect the two engine connectors with their rubber sealsto the lower inlet and the upper outlet, then fit a filter on the lower inlet before you fill. The engine must never run dry or without a filter, and neither is covered.
- Purge the air before you set a temperature.Once the water reaches the upper outlet, hold the garden hose against the upper outlet and then the lower inlet separately to push the trapped air out of the loop. Air in the circuit is the usual reason a new tub sounds wrong and cools slowly, and it is five minutes of work to prevent.
What Icetubs asks of you in the water
Worth reading their own user guidance before the first session rather than after. Icetubs asks for sessions of one to three minutes and a five minute maximum, your head completely above water at all times, entering and leaving slowly rather than jumping in, and never using the tub alone. Children under twelve only with close adult supervision, shorter times and warmer water. And they ask you to speak to a doctor first if you have a heart, circulatory or respiratory condition, uncontrolled high blood pressure, epilepsy or a fainting disorder, or if you are pregnant. It is all set out in section 8 of the operational manual that ships with the tub.
Before the first session
Plug the engine in and check the breaker box on the cable hangs clear of the ground and out of standing water. Set the temperature on the panel or pair the app, then leave it. From tap water on this model, expect four to five hours, and let it hold the set temperature for a full cycle before you get in.
Or add Professional Setup and Assembly in the buy box above and a professional crew unpacks, assembles and positions everything on site, then takes the packaging away.
Reference
Icetubs IceBarrel XL specifications
| Footprint | 40.2 × 62.3 in, tub and engine together |
|---|---|
| Interior diameter | 35.1 in, fiberglass |
| Water capacity | 113.6 gal (430 L) |
| Cooling range | To 37.4°F · 100.4°F needs the heater option |
| Power | 110 V / 60 Hz, 14.5 A maximum |
| Shipping weight | 421 lb, or 474 lb with stairs |
Full specification tables
| Overall, without stairs | 40.2 × 62.3 × 46.4 in |
|---|---|
| Overall, with stairs | 40.2 × 70.4 × 52.2 in |
| Height with the cover on | 49.9 in |
| Tub alone | 40.2 in diameter |
| Cooling engine | 22.9 in wide × 25.7 in deep × 23 in high |
| Interior diameter | 35.1 in (903 mm) |
| Seating depth | 25.8 in (655 mm) |
| Empty weight | 373 lb, or 426 lb with stairs, engine included |
| Filled, with one bather | approx. 1,497 lb |
| Floor loading | 170 lb per sq ft, or 176 with stairs |
| Stair steps | Two, 11.8 in and 11.5 in deep, 25.9 in wide |
| Volume | 113.6 gal (430 L) |
|---|---|
| Circulation | 55 L/min, full turnover roughly every 8 minutes |
| Filter | Replaceable 5 micron cartridge, three supplied |
| Ozone | Built in generator, 200 to 300 mg/h output |
| Water treatment | AquaFinesse only. Chlorine, bromine and salts are excluded |
| Plumbing | None. Garden hose fill, drain valve |
| Engine | 1 HP, 110 V / 60 Hz, 14.5 A max, 1.7 kW max input, 14 AWG |
|---|---|
| Cooling | 2.18 kW measured, R32 refrigerant |
| Control | Engine panel or the Icetubs app over Wi-Fi |
| Noise | 60 dB(A) at 1 m (about 3 ft) |
| Clearance | 50 cm around the engine, air outlet clear by 20 in |
| Ambient range | 23°F to 104°F engine on, 34°F to 104°F engine off |
| Warranty | 2 years private use, 6 months light professional. Ozone generator and water pump excluded |
| Delivery | Free LTL freight to the contiguous 48, curbside off a liftgate |
Choosing within the range
Icetubs IceBarrel XL against the rest of the range
Same engine in all three, same water care, same warranty. What changes is the posture you plunge in, how much room you get, and what it does to your floor.
| IcetubsIceBarrel XLYou are here | IcetubsIceBarrel | IcetubsIceBath | IcetubsIceBath XL | |
|---|---|---|---|---|
| Posture | Seated upright | Seated upright | Lying flat | Lying flat |
| Interior | Fiberglass | 304 stainless | 304 stainless | 304 stainless |
| Room inside | 35.1 in across | 26.8 in across | 23.2 in wide | 26.6 in wide |
| Footprint | 40.2 × 62.3 in | 30.6 × 53 in | 27.5 × 88.9 in | 31.8 × 96 in |
| Water | 113.6 gal | 92.5 gal | 106.7 gal | 132.1 gal |
| Floor loading | 170 lb/sq ft | 250 | 83 | 79 |
| Stairs option | Yes | Yes | No | No |
Two rows decide most of these. If you want to lie down rather than sit up, you want an IceBath. If the interior material matters more than shoulder room, the standard IceBarrel is stainless for less money. Still deciding between cold water and a chamber? Our cryotherapy versus cold plunge comparison sets out the difference, or call us.
Independent reports
What we can and cannot tell you yet
Icetubs is new to our range and we have not sold enough to have reviews of our own. We are not going to borrow anyone else's.
The figure to weigh on this model
35.1 inches across inside against the standard barrel's 26.8, on the same engine and the same warranty. That is the whole case for the XL, and the cost of it is 9.6 more inches of floor and an hour longer to pull down from tap water.
What is easy to miss
The electrics in section 05, the two winter thresholds in section 06 and the 104°F ceiling beside them. All three sit in the warranty terms rather than on a spec sheet, and all three are conditions of cover.
What we are still collecting
Real standby consumption through a winter, and whether the fiberglass tub measurably beats the stainless models on holding cost. If you buy one and will tell us, we will publish it.
Two notes on the paperwork. Published data sheets for this model are not consistent on the interior: one field reads Thermowood and stainless steel, another reads Thermowood and fiberglass. It is fiberglass, confirmed by the model name, by the supplied photography where the white liner is unmistakable, and by every US dealer spec sheet we checked. Separately, the manual supplied with these tubs carries the European electrical specification of 220 to 230 volts at 50 hertz. The engine built for this market is the 110 volt, 60 hertz version drawing 14.5 amps.
Buyer questions
Icetubs IceBarrel XL, questions buyers ask before ordering
Is the XL interior really fiberglass and not stainless?
Yes. The standard IceBarrel and both IceBath sizes have 304 stainless interiors. The XL has a molded fiberglass insert, which is why it looks white inside in the photographs rather than brushed metal. Icetubs describes the insert as lightweight and highly insulating. Stainless will not stain, hold odor or scratch. Same two year warranty either way. Published spec sheets are not consistent on this point, so if you see stainless quoted for an XL, fiberglass is what this model actually ships with.
How much bigger is it inside than the standard IceBarrel?
8.3 inches wider: 35.1 inches across against 26.8. It is not deeper. The seating depth is 25.8 inches here against 26.5 on the standard, so you are sitting in a wider, marginally shallower tub. It holds 113.6 gallons against 92.5. If shoulder room is the thing you want, this is the model. If maximum depth in the smallest footprint is the thing, the standard barrel still wins.
Does it really plug into a standard household outlet?
It plugs into a grounded outlet, but the load is 14.5 amps at 110 volts when the engine is pulling hard, a heavy continuous draw for a shared household circuit. Icetubs asks for a grounded outlet protected by a GFCI breaker in the main panel, on a breaker that meets local regulations. Plan on a dedicated circuit and have a licensed electrician set the rating.
Can I leave the Icetubs IceBarrel XL outside through a freezing winter?
Only within limits, and they are warranty conditions rather than advice. Down to 34°F you can switch the engine off. Between 23°F and 34°F it must run in automatic mode around the clock so the water never freezes. Below 23°F you detach it, store it indoors and drain the tub. A burst pipe is specifically not covered. Section 06 has the full table.
How long does it take to cool down, and what does that cost?
From tap water at around 68°F down to 37.4°F, expect four to five hours in mild conditions. That is about 8.5 kilowatt hours of heat to remove from 430 liters against 2.18 kilowatts of cooling, so roughly 5.3 kilowatt hours of electricity, or about 97 cents at the current US residential average. The standard IceBarrel does the same job in three to four hours because it holds 21 gallons less. Holding temperature costs far less because the engine cycles, but Icetubs publishes no standby figure and we are not going to invent one.
Should I take the stairs option?
Take them if anyone using the tub has a knee, hip or balance issue, if more than one household will use it, or if a wet step onto a hard surface is a real risk. Without them you are stepping over a 46 inch rim. They are Thermowood and stainless to match, they mount over the cooling engine so they use space you had already given up, and they add 8.1 inches of length and 5.8 inches of height. They are a variant of this product rather than a part we can add afterwards, so choose now.
Will the Icetubs IceBarrel XL go on my deck?
Filled with a bather, Icetubs gives this as 170 pounds per square foot on the floor, or 176 with the stairs. That is meaningfully lighter than the standard IceBarrel at 250, because the same load spreads over a wider base. Decks and upper floors are built to a specified load, so have your deck builder or a structural engineer confirm the structure can carry it before you order. If the deck is the constraint rather than the space, look at the IceBath, which is 83 pounds per square foot.
Who fixes the IceBarrel XL if the engine fails?
We open the claim, you deal with us. Icetubs does not send technicians. They either ship a replacement part with instructions and remote support, or arrange free collection of the component, repair or replace it and return it. Engines are usually collected. Labor for removing and refitting is excluded, as are the ozone generator and the water pump. A replaced part carries the remainder of the original term rather than starting a fresh one. Full terms are on our Icetubs warranty policy page.
Can I use it in a gym or a clinic?
Yes, on six months of cover rather than two years. Icetubs defines light professional use as a business where the tub is not the primary revenue generating equipment, which they give as a small studio, clinic or office, and filters go weekly there. A dedicated cold plunge studio, where the tub is the business, falls outside this warranty entirely and needs separate commercial terms. Tell us before you order if that is you, and see the rest of our commercial cold plunges if you are comparing.
Note also that the published limits of fifteen bathers a day and three an hour are a condition of the warranty in any use, private or professional, not only commercial.
What happens if it arrives damaged?
Note it on the delivery receipt before you sign, photograph everything before you move it, and call us the same day on (888) 500-5675. This one is genuinely time sensitive: Icetubs requires visible transport damage recorded on the delivery document at delivery and reported within twenty four hours with photographs, and hidden damage has the same window. A clean signature lets the carrier treat the goods as delivered in good condition. A fault that appears later runs on a different clock: Icetubs asks a consumer to report a defect within two months of discovering it, and a business user within fourteen days.
One last thing
Settle the gate and the circuit first
Ten minutes on the phone covers the two things that are expensive to get wrong on the XL: whether 40.2 inches will pass every gate and doorway on the route, and whether your circuit can carry 14.5 amps.
ChaddyCold therapy specialistMon to Sat, 9am to 6pm EST
Complete Your Recovery Setup
The add-ons our customers choose most.
