Authorized Harvia DealerManufacturer's Warranty Included
EARLY BLACK FRIDAY SALE
Regular price
$3,736.00
Regular price
Sale price
$3,736.00
FREE SHIPPING
Unit price
/ per
Sale
Sold out
Notify me when this product is available:
Found it lower? We'll match it,before or after you buy. ?
Send us a link to the lower price. If it is the same model, new and in stock at an authorized U.S. online retailer, we match it. Already ordered? If it was lower on your order date, claim the difference within 30 days.
Excludes sale pricing, marketplace sellers and later price drops.
Free to the contiguous 48. What changes across the range is not the cost to you but how it arrives.
Electric heaters ship by parcel. Wall mounted and pillar heaters run roughly 29 to 55 pounds, so they travel as insured ground parcel. No delivery appointment and nobody needs to be home.
Wood burning stoves ship by freight. A stove moves palletized on an LTL carrier. The carrier calls to arrange an appointment window, someone must be there to sign, and it is a curbside drop rather than a carrier leaving it at the door.
Stones ship separately. A heater takes anywhere from one box to thirteen at roughly 44 pounds a box, so stones ordered on their own are charged per box at checkout. Stones added from a heater’s own page ship free with that heater.
When it ships, and how you will know. Most orders ship promptly, though some part numbers are supplied from Finland and take longer, so we confirm the position for your specific model when you order. You get a tracking notification by email once it ships.
Where we ship. The contiguous 48 states. Alaska, Hawaii, Puerto Rico and Canada are quoted case by case, so contact us before ordering.
If it arrives damaged. Check the carton or pallet for damage while the driver is still there and note any damage on the delivery receipt at the time of signing, then contact us the same day. A clean signature with no damage noted makes a freight claim much harder to win.
Residential coverage. Two years on electric heaters, controls and steam generators including the heating elements, and two years on wood burning stoves, running from your date of purchase.
A free third year. Register within 30 days and Harvia adds a third year on electric heaters in residential use. We send you the link and your serial number with your order.
Commercial coverage. Two years on electric heaters, controls and electronics, but six months on heating elements and six months on wood burning stoves.
Professional installation is a condition. Harvia requires that the unit is installed and wired by a licensed electrician, and that proof of professional installation can be presented with a claim. A heater wired by the owner is outside the warranty, so keep your installer's invoice with your receipt.
Not covered. Normal wear, improper installation, poor maintenance, failure to follow the instructions, alterations and improper use. Sauna stones are a consumable and are not covered, and stones Harvia does not specify for your model can void cover.
Transport damage has a seven day limit. Harvia requires damage found on receipt to be reported no later than seven days after delivery. Call us the same day, because a claim is far easier to win with the damage noted on the delivery receipt.
Changing how you use it ends the cover. Moving a heater from a family sauna into a gym, a rental or any other commercial setting ends the residential cover rather than converting it. Tell us before you order if the room will be used commercially.
A callout for a fault that is not covered can be charged. If the defect turns out to fall outside the warranty, Harvia is entitled to charge for the work of finding it, including labour, travel and shipping at actual cost. Call us first and we will work through the symptoms with you before anything is booked.
Who handles it. Harvia US Inc. is the warrantor for North America and we open the claim with them on your behalf. Call (888) 500-5675.
30 days from purchase. The unit must be new, uninstalled and in resalable condition with its original packaging and all included parts. A heater that has been wired in, fired, or loaded with stones counts as installed and cannot be returned.
What a return costs. There is no percentage restocking fee on a standard customer return. You get full credit for the product, less a repackaging fee that typically runs about 20 to 50 dollars depending on the item.
Who pays the return freight. You do on a change of mind. We do, and the distributor does, when the cause is shipping damage or an error on our side, and nothing is deducted for freight in those cases.
Damaged on arrival. A different process, and it is time sensitive. Note the damage on the delivery receipt before you sign, photograph the carton and the contents, and call us the same day. Concealed damage found after signing is much harder to claim, so open the box on delivery day even if you are not installing for weeks.
Sauna stones. Stone is sold by weight and is not returnable once a box is opened.
Controls and accessories. Same 30 day window and the same condition requirement. A control unit that has been wired in cannot be returned.
To start a return. Call (888) 500-5675. A Return Authorization number is required before anything goes back, and product returned without one can be refused.
No. The heater arrives built. It has to be placed and wired: it stands on the floor and is levelled on its adjustable legs. A licensed electrician makes the connection, then you load the stones.
The Harvia Virta Pro HL160E is a 16 kW electric sauna heater that holds 200 lbs of stone, sold separately, run from a separate control
Harvia rates it for rooms of 354 to 918 cubic feet. It stands on the floor on adjustable legs, and it is switched from a separate Harvia control whose power unit mounts outside the hot room. The control and the stones are separate items, and both are in Complete your heater above Add to Cart.
The room
354 to 918 cu ft
Measure your room's length, width and height in feet and multiply. Not sure? Check my room works it out for you.
The circuits
66.7 A at 240 V
Two or four separate 240-volt circuits, single phase, run by a licensed electrician through the control.
The stones
200 lbs, not included
Five boxes of Harvia AC3000 fill it, and they are in Complete your heater with the control.
See how it installs
How the Virta Pro opens for wiring
Harvia's own animation of the service hatch: the connections are reached through the front of the heater.
The heating elements sit apart from the stones, so an element can be changed through the hatch without unloading the stone space.
Official Harvia film0:50
Size and fit354 to 918 cu ft · 51 to 133 sq ft
Sizing the HL160E
Is 16 kW the right output for your room?
Harvia rates the HL160E for rooms of 354 to 918 cubic feet, and the volume is the figure that decides. Check my room does the arithmetic and the check for you.
What the 16 kW Virta Pro is rated for
Room volume
354 to 918 cu ft. This is the figure that governs
Floor area
51 to 133 sq ft
Minimum ceiling height
82.7 in (2100 mm)
Log walls
Harvia asks you to multiply the cubic volume of a log sauna by 1.5
In a finished sauna.
Harvia's distances to the walls, front and ceiling
Side and rear walls, and in front
2 in (50 mm)
Top of the heater to the ceiling
49.6 in (1260 mm)
The 133 square foot limit assumes the 82.7 inch minimum ceiling; with a 7 foot ceiling, 918 cubic feet is about 131 square feet of floor. Harvia's room ratings assume a well insulated room lined with wood panel, and brick, glass block or plaster walls must be insulated. The heater stands on adjustable legs in a footprint of 31 by 13 inches, on a heat resistant floor covering, because hot pieces of stone can damage the floor. These are Harvia's minimum safety distances; installing closer is a fire risk. Harvia also calls for a softwood fence around the heater, fixed to the wall, at least 2 inches from it, at least 28 inches (710 mm) tall, and with its top at least 1 inch (25 mm) below the top of the heater.
Output and power66.7 A on two or four circuits
Control and electrical
66.7 amps at 240 volt, on two or four separate circuits
The HL160E has no switches of its own. Its load is split across two or four separate 240-volt circuits, and a Harvia control, with a power extension unit when the install uses four, switches them.
What your electrician needs
Total load
66.7 A at 240 V, single phase
Two circuits
Up to 33.3 A on each circuit, switched by a Xenio CX45 alone
Four circuits
Up to 22.3 A on each circuit, switched by a Xenio CX30 or CX45 with an LTY45 power extension unit
The control in Complete your heater is the Xenio CX45, which runs a two circuit install; for four circuits, add the LTY45 there too. Your electrician sizes each circuit's breaker and wire to local code. The control panel and its power unit go in a dry place; the power unit mounts on a wall outside the hot room.
Harvia says not to wire the heater through a GFI (ground fault) breaker. Agree this with your electrician and inspector before wiring starts.
What is includedSensor in; control and stones separate
What is in the box
Included with your Virta Pro HL160E
Harvia Virta Pro HL160E electric sauna heaterOn adjustable legs
WX248 temperature sensorMounts on the sauna wall and reports the room temperature to the control
Fastening kit
Caution and warning signsOne goes on the wall above the heater, one on the sauna door
Installation and operation instructions
The HL160E on its own, in black.
The control and the stones are not in the heater box, and it needs both to run.Complete your heater above Add to Cart adds the Xenio CX45 for a two circuit install (add the LTY45 for four) and five 44 lb boxes of Harvia AC3000, 220 lbs for a 200 lb stone space, so about 20 lbs are left over. The Harvia Virta Pro HL160E sauna heater package is the heater, the control and the stones in one order.
The stone size is 2 to 4 inches (5 to 10 cm), angular split face, and AC3000 is Harvia's split-face olivine diabase in that size. Harvia's warranty does not cover damage caused by stones it does not recommend, so the grade is worth getting right.
DeliveryFreight
Shipping and delivery
How your heater ships
The heater by freight.
Ships by freight
At 92.6 lbs the HL160E ships by freight rather than as a parcel.
Free to the contiguous US
Every Harvia heater ships free to the lower 48. Stones ship separately and their shipping is charged per box at checkout. Alaska, Hawaii, Puerto Rico and Canada are quoted separately.
Check before installation
Note any carton damage on the delivery receipt and contact us the same day; Harvia requires transport damage to be reported within seven days. Claim any visible defect before the heater is installed, because Harvia treats installing it as accepting it.
Warranty and service2 years, 3 with registration
After the sale
Who stands behind the HL160E, and for how long
Harvia US Inc. is the warrantor, and we open the claim with Harvia on your behalf.
The written warranty
Family use (private household)
2 years, heating elements included
Third year
Register the heater with Harvia within 30 days of purchase and Harvia adds a year in family use, for 3 in total
Commercial use
2 years on the heater, 6 months on heating elements
Before a commercial order
Harvia's instructions are written for a family sauna; get Harvia US's OK in writing first
Keep two papers: your receipt, because cover runs from the date of purchase, and your electrician's invoice, because Harvia asks for proof of professional installation with a claim.
How it is madeElements apart from the stones
Harvia Virta Pro HL160E features
What you are buying at 16 kW
A wide steel cabinet Harvia builds for heavy duty use, with its heating elements divided into two groups.
The wide Virta Pro cabinet in a finished sauna.
200 lbs of stone in a 31 inch wide cabinet. The stone space is open at the top, and Harvia asks for the stones to be placed sparsely so air can circulate between them.
Elements kept apart from the stones. Harvia separates the heating elements from the stone space, which it says gives them a long life, and they are changed through the service hatch on the front.
Every connection at the front. The wiring is made through the same hatch, with room around the connections.
Steel, finished in black. Rated IPX4 against splashing.
Harvia Virta Pro HL160E electric sauna heater specifications
Every published figure for the HL160E, in one place.
Output and electrical
Model
Virta Pro HL160E (HL16U1UL)
Heater output
16 kW
Room volume
354 to 918 cu. ft.
Floor area
51 to 133 sq. ft.
Minimum room height
82.7" (2100 mm)
Voltage
240 VAC, 60 Hz, single phase
Total amperage
66.7 A
Two circuits
Up to 33.3 A on each circuit, 8 AWG copper from the load center to the control; Harvia's control instructions set their own minimum, and your electrician uses the larger
Four circuits
Up to 22.3 A on each circuit, 12 AWG copper from the load center to the control and the LTY45
Controls
Xenio CX45 on two circuits; Xenio CX30 or CX45 with an LTY45 on four
GFI breaker
Not used, per Harvia; your inspector decides the local code
Wire inside the sauna
Silicone cable rated to 300°F (150°C), in seal tight conduit
Hardwired
Yes, licensed electrician required
Body and stones
Width
31"
Depth
13"
Height
33"
Weight
92.6 lbs (42 kg)
Stone amount
200 lbs (90 kg)
Stone size
2 to 4 in (5 to 10 cm), angular split face
Construction
Steel, black
Installation
Floor standing on adjustable legs
Distance to side and rear walls, and in front
2" (50 mm)
Distance to the ceiling
49.6" (1260 mm)
Temperature sensor
WX248, in the heater box
IP rating
IPX4
Certification
ETL listed
Compare the Virta rangeThe other sizes in the range
Sizing within the range
The HL160E against the rest of the Virta range
The HL160E is the 16 kW Virta Pro. The HL110E is the largest Virta. The two Virta Pro heaters are the same width and height; the HL200E is 3 inches deeper and holds more stone.
Choose the HL160E for a room of 354 to 918 cubic feet on a 240 volt supply. Choose the HL200E up to 1130 cubic feet on 208 volt three phase, and the HL110E for a room up to 635 cubic feet.
Buyer questionsWhat buyers ask before ordering
Buyer questions
Questions buyers ask about the Virta Pro HL160E
What size sauna room does the Harvia Virta Pro HL160E heat?
Harvia rates it for 354 to 918 cubic feet, with a ceiling of at least 82.7 inches. Harvia counts a log room at 1.5 times its volume and wants brick, glass block or plaster insulated, either of which can move a room out of this range; check my room works it out.
Does the HL160E need a separate control unit?
Yes. It has no switches of its own. On two circuits the Xenio CX45 in Complete your heater runs it alone; for four circuits, add the LTY45 power extension unit there too. The HL160E sauna heater package includes the control and the stones.
How many circuits does the HL160E require?
Two or four separate 240-volt circuits, 66.7 A in total. On two circuits a Xenio CX45 switches it on its own; on four, a Xenio CX30 or CX45 works with an LTY45 power extension unit. Harvia says not to use a GFI breaker; your inspector decides local code.
Are sauna stones included with the Virta Pro HL160E?
No. It holds 200 lbs, and the heater needs them to run. Complete your heater adds five 44 lb boxes of Harvia AC3000, 220 lbs for a 200 lb stone space, so about 20 lbs are left over. Harvia's warranty does not cover damage caused by stones it does not recommend.
Can I install the Harvia Virta Pro HL160E myself?
No. It is hard-wired, and Harvia's warranty requires installation by a qualified electrician with proof of it, so keep the invoice. There is no plug: the heater, the control's power unit and the sensor are all wired in.
What warranty comes with the Virta Pro HL160E?
Harvia's current terms give two years in family use (a private household), elements included, plus a third when you register with Harvia within 30 days of purchase, even before it is installed. Commercial use is two years on the heater, and six months on the elements; for a commercial room, confirm with Harvia US.
Is the HL160E suitable for a home sauna?
Harvia builds the Virta Pro for heavy use, in saunas for spas, hotels and apartment buildings. It is rated for rooms of 354 to 918 cubic feet with a ceiling of at least 82.7 inches, on 66.7 A across two or four circuits. A home sauna that size, with that supply, is within its ratings.
Get the output and the circuit right
Ten minutes with a specialist checks your room against Harvia's ratings, helps you choose the control and lists what to ask your electrician.Monday to Saturday, 9AM to 6PM ET