Authorized Harvia DealerManufacturer's Warranty Included
EARLY BLACK FRIDAY SALE
Regular price
$1,155.00
Regular price
Sale price
$1,155.00
FREE SHIPPING
Unit price
/ per
Sale
Sold out
Notify me when this product is available:
Found it lower? We'll match it,before or after you buy. ?
Send us a link to the lower price. If it is the same model, new and in stock at an authorized U.S. online retailer, we match it. Already ordered? If it was lower on your order date, claim the difference within 30 days.
Excludes sale pricing, marketplace sellers and later price drops.
Free to the contiguous 48. What changes across the range is not the cost to you but how it arrives.
Electric heaters ship by parcel. Wall mounted and pillar heaters run roughly 29 to 55 pounds, so they travel as insured ground parcel. No delivery appointment and nobody needs to be home.
Wood burning stoves ship by freight. A stove moves palletized on an LTL carrier. The carrier calls to arrange an appointment window, someone must be there to sign, and it is a curbside drop rather than a carrier leaving it at the door.
Stones ship separately. A heater takes anywhere from one box to thirteen at roughly 44 pounds a box, so stones ordered on their own are charged per box at checkout. Stones added from a heater’s own page ship free with that heater.
When it ships, and how you will know. Most orders ship promptly, though some part numbers are supplied from Finland and take longer, so we confirm the position for your specific model when you order. You get a tracking notification by email once it ships.
Where we ship. The contiguous 48 states. Alaska, Hawaii, Puerto Rico and Canada are quoted case by case, so contact us before ordering.
If it arrives damaged. Check the carton or pallet for damage while the driver is still there and note any damage on the delivery receipt at the time of signing, then contact us the same day. A clean signature with no damage noted makes a freight claim much harder to win.
Residential coverage. Two years on electric heaters, controls and steam generators including the heating elements, and two years on wood burning stoves, running from your date of purchase.
A free third year. Register within 30 days and Harvia adds a third year on electric heaters in residential use. We send you the link and your serial number with your order.
Commercial coverage. Two years on electric heaters, controls and electronics, but six months on heating elements and six months on wood burning stoves.
Professional installation is a condition. Harvia requires that the unit is installed and wired by a licensed electrician, and that proof of professional installation can be presented with a claim. A heater wired by the owner is outside the warranty, so keep your installer's invoice with your receipt.
Not covered. Normal wear, improper installation, poor maintenance, failure to follow the instructions, alterations and improper use. Sauna stones are a consumable and are not covered, and stones Harvia does not specify for your model can void cover.
Transport damage has a seven day limit. Harvia requires damage found on receipt to be reported no later than seven days after delivery. Call us the same day, because a claim is far easier to win with the damage noted on the delivery receipt.
Changing how you use it ends the cover. Moving a heater from a family sauna into a gym, a rental or any other commercial setting ends the residential cover rather than converting it. Tell us before you order if the room will be used commercially.
A callout for a fault that is not covered can be charged. If the defect turns out to fall outside the warranty, Harvia is entitled to charge for the work of finding it, including labour, travel and shipping at actual cost. Call us first and we will work through the symptoms with you before anything is booked.
Who handles it. Harvia US Inc. is the warrantor for North America and we open the claim with them on your behalf. Call (888) 500-5675.
30 days from purchase. The unit must be new, uninstalled and in resalable condition with its original packaging and all included parts. A heater that has been wired in, fired, or loaded with stones counts as installed and cannot be returned.
What a return costs. There is no percentage restocking fee on a standard customer return. You get full credit for the product, less a repackaging fee that typically runs about 20 to 50 dollars depending on the item.
Who pays the return freight. You do on a change of mind. We do, and the distributor does, when the cause is shipping damage or an error on our side, and nothing is deducted for freight in those cases.
Damaged on arrival. A different process, and it is time sensitive. Note the damage on the delivery receipt before you sign, photograph the carton and the contents, and call us the same day. Concealed damage found after signing is much harder to claim, so open the box on delivery day even if you are not installing for weeks.
Sauna stones. Stone is sold by weight and is not returnable once a box is opened.
Controls and accessories. Same 30 day window and the same condition requirement. A control unit that has been wired in cannot be returned.
To start a return. Call (888) 500-5675. A Return Authorization number is required before anything goes back, and product returned without one can be refused.
No. The heater arrives built. It has to be mounted and wired: it hangs on lag screws you drive into the wall, with extra backing behind a thin wall, and the controls are on the heater rather than separate. A qualified electrician makes the connection, then you load the stones.
Siting, clearances and the connections are in the owner's manual.
The Harvia KIP45B is a 4.5 kW wall-mounted sauna heater with its controls built in
It suits rooms of 100 to 210 cubic feet, runs on one 240-volt circuit, and takes 44 lbs of stone. Time and temperature are set on dials on the heater itself, so there is no wall controller to buy, wire or find a place for.
The room
100 to 210 cu ft
Measure your room's length, width and height in feet and multiply. Not sure? Check my room works it out for you.
The circuit
18.8 A at 240 V
One 240-volt circuit, single phase, hard-wired by a licensed electrician.
The stones
44 lbs, not included
One box of Harvia AC3000. Add it in the product options above Add to Cart, or buy the two together as a package.
Size and fit100 to 210 cu ft · 16 to 30 sq ft
Sizing the KIP45B
Is 4.5 kW the right output for your room?
Harvia rates the KIP45B for rooms of 100 to 210 cubic feet. Check my room does the arithmetic and the check for you.
What the 4.5 kW KIP is rated for
Room volume
100 to 210 cu ft
Floor area
16 to 30 sq ft
Minimum height
75 in in the United States, 78 in in Canada
Ceiling
No higher than 90 in (7.5 ft), Harvia's room guidance
Glass, brick, concrete or tile
Each square foot of such wall left uninsulated adds about 4 cu ft to the room
Log walls
Harvia asks you to multiply the cubic volume of a log sauna by 1.5
The KIP B in a finished sauna.
Harvia rates both: 100 to 210 cubic feet and 16 to 30 square feet of floor. Stay inside both. Uninsulated glass or masonry and log walls can move a room out of this range, and check my room accounts for them.
Harvia's minimum safety distances
Side walls and upper benches
At least 3 in (75 mm)
Lower bench in front
At least 2 in (50 mm) from the heater, its top at least 1 in (25 mm) below the top of the heater
Above the heater to the ceiling
At least 42 in (1100 mm)
Off the floor
The heater hangs 7 to 12 in (178 to 305 mm) above it
Guard rail or wood fence
Harvia's safety drawing places one 2 in (50 mm) out from the heater
These are Harvia's minimum safety distances; installing closer is a fire risk.
Output and power18.8 A at 240 V, no GFCI
Electrical requirements
18.8 amps at 240 volt single phase
One circuit, run by a licensed electrician. Wire sizes are in Specifications.
What your electrician needs
Circuit
18.8 A at 240 V, single phase, one hard-wired circuit
Breaker
A standard 2-pole breaker
Controls
On the heater: a thermostat on the left, a timer on the right
Harvia says to use a standard 2-pole breaker, not a GFCI. Agree local code with your electrician and inspector before wiring starts.
Harvia asks for proof of professional installation, so keep the invoice. Two signs come in the box: the CAUTION sign goes on a wall near the heater, the WARNING sign outside the sauna room, on or near the door.
What is includedHeater and fixings in, stones out
What is in the box
Included with your KIP45B
Harvia KIP45B sauna heater
Mounting screwsThe heater hangs on two lag screws set 15¼ in apart and 20 in off the floor
Temperature sensor cover and trim piecesThe sensor goes on the wall about 14 in below the ceiling and 14 in from the heater
CAUTION and WARNING signs
Installation and use instructions
The thermostat and timer dials at the base of the heater.
Stones are not in the heater box, and the heater needs them to run. It takes 44 lbs, which is one box of Harvia AC3000. Add them in the product options above Add to Cart, or take the KIP45B package.
The stone size is 2 to 4 inches (5 to 10 cm), and AC3000 is split-face olivine diabase in exactly that grade. Harvia's warranty excludes damage caused by stone it does not recommend, so the grade is worth getting right.
DeliveryParcel, not freight
Shipping and delivery
How your heater ships
Ships by parcel carrier
At 36.8 lbs boxed the KIP45B ships as a standard parcel rather than freight, so there is no freight appointment to schedule.
The contiguous US
Delivered throughout the lower 48. Alaska, Hawaii, Puerto Rico and Canada are quoted separately.
Inspect before the electrician
Note any carton damage on the delivery receipt and contact us the same day. Harvia requires transport damage reported within seven days, and treats installing a product with a visible defect as accepting it.
Warranty and service2 years, 3 with registration
After the sale
Who stands behind the KIP45B, and for how long
Harvia US Inc. is the warrantor, and we open the claim with Harvia US on your behalf.
The written warranty
Family use (private household)
2 years, including the heating elements, under the Limited Warranty for Harvia Products dated 18 November 2025
Third year
For electric heaters in family use, register with Harvia within 30 days of purchase and Harvia adds a year, for 3 years in total. Registration is free, on Harvia's website
Commercial use
2 years on the heater, excluding wear parts; 6 months on the heating elements
Keep your receipt, because cover runs from the date of purchase, and your electrician's invoice, because Harvia asks for proof of professional installation.
How it is madeWall mounted, 8 hour pre-set, IPX4
Harvia KIP45B features
What you are buying at 4.5 kW
Wall mounted, so the floor stays clear.
Wall mounted, floor stays clear. The heater hangs on two lag screws, 7 to 12 inches off the floor, at 16.1 by 11 by 23.6 inches, so a small room keeps its bench space and its walking room.
Controls built into the heater, and the timer does two jobs. Turned to the large 1 it runs the heater for an hour and then shuts off by itself. The small numbers pre-set a start up to 8 hours ahead, so the room is hot when you get home. Allow between half an hour and an hour for the room to heat. There is no app or remote start on the B; a W model with the Xenio CX170 WiFi control adds that.
44 lbs of stone, stacked by hand. Flat stones go at the bottom around the elements and larger ones on top, with no element showing. Harvia asks for the stones to be replaced at least every two years.
Steel body, rated IPX4. In a stainless finish, and built to UL 875, the US standard for sauna heaters.
At least 2" (50 mm), top at least 1" (25 mm) below the heater top
Above the heater to the ceiling
At least 42" (1100 mm)
Temperature sensor
On the wall about 14" (355 mm) below the ceiling and 14" from the heater
Mounting height
7" to 12" (178 to 305 mm) off the floor
Stone amount
44 lbs (20 kg)
Stone size
2 to 4 in (50 to 100 mm)
Construction
Steel
Finish
Stainless steel
Installation type
Wall mounted
Controls
Built into the heater, 1 hour run, 8 hour pre-set
IP rating
IPX4
Standard
Complies with UL 875
Compare the KIP rangeOther sizes and versions
Sizing within the range
The KIP45B against the rest of the KIP series
The KIP45B is the 4.5 kW KIP with its dials on the heater. The B models carry their dials on the heater; the W models run from a Harvia Xenio CX170 control and also come in 208 V three phase.
Choose the KIP45B when your room is 100 to 210 cubic feet and you want the controls on the heater, with nothing else to wire. Choose the KIP60B for a larger one. The KIP45W has the same body, output and room range, with a separate Xenio CX170 control. The full range is on our sauna heaters hub.
Buyer questionsWhat buyers ask before ordering
Buyer questions
Questions buyers ask about the KIP45B
What size sauna room does the Harvia KIP45B heat?
100 to 210 cubic feet. Multiply your room's length, width and height in feet. Uninsulated glass or masonry adds about 4 cubic feet per square foot, and Harvia asks you to multiply the cubic volume of a log sauna by 1.5. Check my room works it out.
What warranty comes with this heater?
Two years in family use (a private household), elements included, and a third if you register an electric heater with Harvia within 30 days. Commercial use is two years on the heater, excluding wear parts, and six months on the elements. We open any claim with Harvia US for you. Full terms are on our Harvia warranty policy page.
Are sauna stones included with the KIP45B?
Not with the heater on its own; it takes 44 lbs, which is one box of Harvia AC3000. The simplest route is the KIP45B package. Grade matters: Harvia excludes damage caused by stone it does not recommend.
Does the KIP45B need a GFCI breaker?
No. Harvia calls for a standard 2-pole breaker and says not to use a GFCI. Agree local code with your electrician and inspector before wiring starts.
Can I install the Harvia KIP45B myself?
No. It is hard-wired, and Harvia asks for proof of professional installation for the warranty, so keep the invoice. The wiring on the sauna walls and ceiling is copper rated for 90°C (194°F).
Is the KIP45B listed for use in the United States?
Yes. Harvia lists a UL certification for this heater, and states that it complies with UL 875, the US standard for sauna heaters.
How long does the KIP45B run before it shuts off?
One hour per start, then it shuts off on its own and you turn it again. The small numbers on the timer pre-set a start up to 8 hours ahead. Allow between half an hour and an hour for the room to heat.
Get the output and the circuit right
Ten minutes with a specialist helps you check the room size and the stones, and lists what to ask your electrician.Monday to Saturday, 9AM to 6PM ET
Harvia KIP45B 4.5kW Electric Sauna Heater | Built-In Controls$1,155.00from with shop paywith extras
5 stars: 1 (50%)
4 stars: 0 (0%)
3 stars: 1 (50%)
2 stars: 0 (0%)
1 star: 0 (0%)
S
Steve
Best Little Sauna in Town
We have the smaller unit of this model and it has been a real work horse, getting at least two daily uses since it was installed in July of last year. What has impressed us as much as the unit has been the company support. Any questions we've had have been answered quickly by, wait for it, friendly humans! We have definitely seen the benefits of sauna use and this two person unit (and 4.5kW unit) are a great addition.
Originally posted on almostheaven.com.
C
Chris
Barely adequate and only in the right room
Can't recommend the 4.5Kw heater - takes 90 mins or more to get to temp in our fully enclosed daylight basement with concrete floor.