Authorized Harvia DealerManufacturer's Warranty Included
EARLY BLACK FRIDAY SALE
Regular price
$1,270.00
Regular price
Sale price
$1,270.00
FREE SHIPPING
Unit price
/ per
Sale
Sold out
Notify me when this product is available:
Found it lower? We'll match it,before or after you buy. ?
Send us a link to the lower price. If it is the same model, new and in stock at an authorized U.S. online retailer, we match it. Already ordered? If it was lower on your order date, claim the difference within 30 days.
Excludes sale pricing, marketplace sellers and later price drops.
Free to the contiguous 48. What changes across the range is not the cost to you but how it arrives.
Electric heaters ship by parcel. Wall mounted and pillar heaters run roughly 29 to 55 pounds, so they travel as insured ground parcel. No delivery appointment and nobody needs to be home.
Wood burning stoves ship by freight. A stove moves palletized on an LTL carrier. The carrier calls to arrange an appointment window, someone must be there to sign, and it is a curbside drop rather than a carrier leaving it at the door.
Stones ship separately. A heater takes anywhere from one box to thirteen at roughly 44 pounds a box, so stones ordered on their own are charged per box at checkout. Stones added from a heater’s own page ship free with that heater.
When it ships, and how you will know. Most orders ship promptly, though some part numbers are supplied from Finland and take longer, so we confirm the position for your specific model when you order. You get a tracking notification by email once it ships.
Where we ship. The contiguous 48 states. Alaska, Hawaii, Puerto Rico and Canada are quoted case by case, so contact us before ordering.
If it arrives damaged. Check the carton or pallet for damage while the driver is still there and note any damage on the delivery receipt at the time of signing, then contact us the same day. A clean signature with no damage noted makes a freight claim much harder to win.
Residential coverage. Two years on electric heaters, controls and steam generators including the heating elements, and two years on wood burning stoves, running from your date of purchase.
A free third year. Register within 30 days and Harvia adds a third year on electric heaters in residential use. We send you the link and your serial number with your order.
Commercial coverage. Two years on electric heaters, controls and electronics, but six months on heating elements and six months on wood burning stoves.
Professional installation is a condition. Harvia requires that the unit is installed and wired by a licensed electrician, and that proof of professional installation can be presented with a claim. A heater wired by the owner is outside the warranty, so keep your installer's invoice with your receipt.
Not covered. Normal wear, improper installation, poor maintenance, failure to follow the instructions, alterations and improper use. Sauna stones are a consumable and are not covered, and stones Harvia does not specify for your model can void cover.
Transport damage has a seven day limit. Harvia requires damage found on receipt to be reported no later than seven days after delivery. Call us the same day, because a claim is far easier to win with the damage noted on the delivery receipt.
Changing how you use it ends the cover. Moving a heater from a family sauna into a gym, a rental or any other commercial setting ends the residential cover rather than converting it. Tell us before you order if the room will be used commercially.
A callout for a fault that is not covered can be charged. If the defect turns out to fall outside the warranty, Harvia is entitled to charge for the work of finding it, including labour, travel and shipping at actual cost. Call us first and we will work through the symptoms with you before anything is booked.
Who handles it. Harvia US Inc. is the warrantor for North America and we open the claim with them on your behalf. Call (888) 500-5675.
30 days from purchase. The unit must be new, uninstalled and in resalable condition with its original packaging and all included parts. A heater that has been wired in, fired, or loaded with stones counts as installed and cannot be returned.
What a return costs. There is no percentage restocking fee on a standard customer return. You get full credit for the product, less a repackaging fee that typically runs about 20 to 50 dollars depending on the item.
Who pays the return freight. You do on a change of mind. We do, and the distributor does, when the cause is shipping damage or an error on our side, and nothing is deducted for freight in those cases.
Damaged on arrival. A different process, and it is time sensitive. Note the damage on the delivery receipt before you sign, photograph the carton and the contents, and call us the same day. Concealed damage found after signing is much harder to claim, so open the box on delivery day even if you are not installing for weeks.
Sauna stones. Stone is sold by weight and is not returnable once a box is opened.
Controls and accessories. Same 30 day window and the same condition requirement. A control unit that has been wired in cannot be returned.
To start a return. Call (888) 500-5675. A Return Authorization number is required before anything goes back, and product returned without one can be refused.
No. The heater arrives built. It has to be placed and wired: it stands on the floor, levelled on its adjustable legs and fixed to the sauna structure with the kits supplied. A licensed electrician makes the connection and wires the separate control unit, then you load the stones.
Siting, clearances and the connections are in the owner's manual.
The Harvia Cilindro PC80E is an 8 kW electric sauna heater that holds 200 lbs of stone, sold separately, run from a separate control
Harvia rates it for rooms of 141 to 431 cubic feet. It stands on the floor with its top anchored to the wall, and it is switched from a separate Harvia control whose power unit mounts outside the hot room. The control and the stones are separate items, and both are in Complete your heater above Add to Cart.
The room
141 to 431 cu ft
Measure your room's length, width and height in feet and multiply. Not sure? Check my room works it out for you.
The circuit
33.4 A at 240 V
One 240-volt circuit, single phase, hard-wired through the control's power unit by a licensed electrician.
The stones
200 lbs, not included
Five boxes of Harvia AC3000 fill the column, and they are in Complete your heater with the control.
Stone guide
Loading the stones into a Cilindro
Harvia's own step by step film on stacking stone in its pillar heater.
The column is loaded by hand once the heater is in place, and how the stones sit decides how the steam behaves.
Official Harvia film1:14
Size and fit141 to 431 cu ft · 23 to 69 sq ft
Sizing the PC80E
Is 8 kW the right output for your room?
Harvia rates the PC80E for rooms of 141 to 431 cubic feet, and the volume is the figure that decides. Check my room does the arithmetic and the check for you.
What the 8 kW Cilindro is rated for
Room volume
141 to 431 cu ft. This is the figure that governs
Floor area
23 to 69 sq ft
Minimum ceiling height
75 in (1900 mm)
Log walls
Harvia asks you to multiply the cubic volume of a log sauna by 1.5
In a finished sauna, standing beside the benches.
Harvia's distances to the walls, front and ceiling
Side and rear walls
1.2 in (30 mm)
In front
4 in (100 mm)
To the ceiling
35 in (890 mm)
The 69 square foot limit assumes the 75 inch minimum ceiling; with a 7 foot ceiling, 431 cubic feet is about 62 square feet of floor. The heater stands in a footprint of 14 by 13 inches. These are Harvia's minimum safety distances; installing closer is a fire risk. Harvia's instructions also call for a softwood fence around the heater, fixed to the wall, at least 4 inches from it, at least 32 inches tall, and with its top at least 1 inch below the top of the heater. The heater is secured to the floor with at least two screws or bolts, and its top is anchored to the wall with the bracket in the box.
Output and power33.4 A, and a separate control
Control and electrical
33.4 amps at 240 volt, switched from a control on the wall
The PC80E has no switches of its own. A separate Harvia control sets the temperature and the start time, and its power unit, mounted outside the hot room, feeds the heater.
What your electrician needs
Circuit
33.4 A at 240 V, single phase. Harvia allows at most 45 A (CX45, FX45) on each supply group; your electrician sizes the breaker and wire to local code
Supply
240 V single phase only, not a 208 V three-phase supply
The control in Complete your heater is the Harvia Xenio CX45. It carries the PC80E's 8 kW on a single supply wire between its power unit and the heater, and with its WiFi the MyHarvia app starts the sauna from your phone. Harvia calls for a safety or door switch for remote start unless the heater is certified for it; your installer confirms which applies.
Harvia says not to wire the heater through a GFI (ground fault) breaker. Agree this with your electrician and inspector before wiring starts.
What is includedSensor in; control and stones separate
Temperature sensorMounts on the sauna wall and reports the room temperature to the control
Wall bracketAnchors the top of the heater to the wall
Installation and operation instructions
The PC80E: an open steel column on adjustable feet.
The control and the stones are not in the heater box, and it needs both to run.Complete your heater above Add to Cart adds the Xenio CX45 and five 44 lb boxes of Harvia AC3000, 220 lbs against a 200 lb column, so about 20 lbs are left over. The Harvia Cilindro PC80E sauna heater package is the heater, the control and the stones in one order.
The stone size is 2 to 4 inches (5 to 10 cm), and AC3000 is Harvia's split-face olivine diabase in that size. Harvia's warranty does not cover damage caused by stones it does not recommend, so the grade is worth getting right.
DeliveryParcel, not freight
Shipping and delivery
How your heater ships
By parcel, with no delivery appointment to book.
Ships by parcel carrier
At 40 lbs boxed the PC80E travels as a standard parcel rather than freight, so there is nobody to wait in for.
Free to the contiguous US
Every Harvia heater ships free to the lower 48. Stones ship separately and their shipping is charged per box at checkout. Alaska, Hawaii, Puerto Rico and Canada are quoted separately.
Check it before installation
Note any carton damage on the delivery receipt and contact us the same day; Harvia requires transport damage to be reported within seven days. Claim any visible defect before the heater is installed, because Harvia treats installing it as accepting it.
Warranty and service2 years, 3 with registration
After the sale
Who stands behind the PC80E, and for how long
Harvia US Inc. is the warrantor, and we open the claim with Harvia on your behalf.
The written warranty
Family use (private household)
2 years, heating elements included
Third year
Register the heater with Harvia within 30 days of purchase and Harvia adds a year in family use, for 3 in total
Intended use
Harvia rates the Cilindro for a family sauna in a private home. For a gym, spa or rental, ask us before you order.
Keep two papers: your receipt, because cover runs from the date of purchase, and your electrician's invoice, because Harvia asks for proof of professional installation with a claim.
How it is made200 lbs of stone in an open column
Harvia Cilindro PC80E features
What you are buying at 8 kW
A pillar heater: a tall steel column, partly open at the front, holding a large mass of stone in a small footprint.
The stone column behind its open steel casing.
200 lbs of stone in a 14 inch footprint. The column stands 40 inches tall, so a heater that takes little floor carries far more stone than a wall unit, and a large stone surface faces the room.
You choose the steam. Throw water into the middle of the pillar or onto the top, and the steam changes between gentle and sharp.
Harvia Cilindro PC80E electric sauna heater specifications, 240V and 33.4 amps
Every published figure for the PC80E, in one place.
Output and electrical
Model
Cilindro PC80E (HPCS8U1HUL)
Heater output
8 kW
Room volume
141 to 431 cu. ft.
Floor area
23 to 69 sq. ft.
Minimum room height
75" (1900 mm)
Voltage
240 VAC, 60 Hz, single phase
Rated amperage
33.4 A
Breaker and supply wire
Sized by your electrician to local code; Harvia allows at most 45 A (CX45, FX45) on each supply group
GFI breaker
Not used, per the Cilindro's US installation guide; your inspector decides the local code
Wire inside the sauna
Silicone cable rated to 300°F (150°C), in seal tight conduit
Hardwired
Yes, licensed electrician required
Controls
Separate Harvia control; the Xenio CX45 carries it on one supply wire
Body and stones
Width
14" (360 mm)
Depth
13" (340 mm)
Height
40" (1010 mm)
Weight
37.5 lbs (17 kg)
Shipping weight
40 lbs
Stone amount
200 lbs (90 kg)
Stone size
2 to 4 in (5 to 10 cm)
Construction
Steel
Installation
Floor standing, screwed to the floor, top anchored to the wall
Distance to side and rear walls
1.2" (30 mm)
Distance in front
4" (100 mm)
Distance to the ceiling
35" (890 mm)
IP rating
IPX4
Certification
ETL listed
Compare the Cilindro rangeThe other sizes in the range
Sizing within the range
The PC80E against the rest of the Cilindro series
The PC80E is the 8 kW Cilindro that runs from a separate control. The PC60E and PC90E are the same pillar at other outputs, and the PC110E is a larger column; the PC80 is this heater with its controls in the base.
Choose the PC80E for a room of 141 to 431 cubic feet with a separate control. Choose the PC60E for a room up to 294 cubic feet, the PC90E up to 494, the PC110E up to 636 with a 78 inch ceiling, and the PC80 if you would rather set the heater on its own dials.
Buyer questionsWhat buyers ask before ordering
Buyer questions
Questions buyers ask about the Cilindro PC80E
What size sauna room does the Harvia Cilindro PC80E heat?
Harvia rates it for 141 to 431 cubic feet, with a ceiling of at least 75 inches. Harvia counts a log room at 1.5 times its volume and wants brick, glass block or plaster insulated, either of which can move a room out of this range; check my room works it out.
Does the PC80E need a separate control unit?
Yes. It has no switches of its own and runs from a separate Harvia control whose power unit mounts outside the hot room. The Xenio CX45 in Complete your heater carries its 8 kW on a single supply wire, and the PC80E sauna heater package includes it.
How many circuits does the PC80E require?
One: 33.4 A at 240 volts single phase, on copper rated to 194°F inside the sauna walls. Your electrician sizes the breaker to local code within Harvia's limit of 45 A (CX45, FX45) on each supply group. Harvia says not to use a GFI breaker; your inspector decides local code.
Are sauna stones included with the Cilindro PC80E?
No. The column holds 200 lbs, and the heater needs them to run. Complete your heater adds five boxes of Harvia AC3000, 220 lbs for a 200 lb column, so about 20 lbs are left over. Harvia's warranty does not cover damage caused by stones it does not recommend.
Can I install the Harvia Cilindro PC80E myself?
No. It is hard-wired, and Harvia's warranty requires installation by a qualified electrician with proof of it, so keep the invoice. There is no plug: the heater, the control's power unit and the sensor are all wired in.
What warranty comes with the Cilindro PC80E?
Two years in family use (a private household), heating elements included, and a third year when you register it with Harvia within 30 days of purchase. For a gym, spa or rental, ask us before you order. Register within 30 days of purchase, even before it is installed.
Is the Cilindro PC80E listed for use in the United States?
Yes. It carries an ETL listing, the mark of Intertek, a testing laboratory recognized by OSHA.
Get the output and the circuit right
Ten minutes with a specialist checks your room against Harvia's ratings and helps you choose the control and the stones.Monday to Saturday, 9AM to 6PM ET