Skip to product information

BioLight Adapt System Professional 360° Red Light Therapy | Customizable Wavelengths

BioLight Adapt System Professional 360° Red Light Therapy | Customizable Wavelengths

BioLight logo
Authorized BioLight Dealer Full Manufacturer's Warranty Included
Regular price
$40,000.00
Regular price
Sale price
$40,000.00
Pay over time — personal & business options shop pay
Personal
Shop Pay Installments. Split into 4 interest-free payments, or pay monthly. Click above for your payment schedule.
Business

A 360 degree system whose wavelengths are chosen at order time.

  • Red 620 to 750 nm, near-infrared 800 to 1,000 nm
  • Each piece 75″ long, table 202 lbs, panel 206 lbs
  • 1,450W per piece, 100-240V, 0.1 µT EMF at the surface
See full details, specs and comparison
White Glove Delivery + Assembly+$749
Total with extras
Extras are added to your cart as their own lines. The product price does not change.
Options
May qualify for HSA/FSA — save 30% on average

Using HSA or FSA funds

We run a reimbursement model. You pay us normally, then claim the money back from your own plan.

1

Check that you qualify. A short chat-based telehealth consultation through Flex. A licensed clinician reviews your answers.

2

Buy with an ordinary card. Check out normally. We do not accept HSA or FSA cards at checkout.

3

Claim it back. Send your documentation and itemised receipt to your plan administrator.

This category is listed as eligible with a Letter of Medical Necessity for a diagnosed condition. Eligibility is decided individually, and your plan administrator has the final say. Flex cannot serve Louisiana, New Mexico or Mississippi.

About the 30%. Flex publishes 30% as the average pre-tax saving on an HSA/FSA purchase. What you actually save is your own combined tax rate, so it moves with your bracket and your state — it is an average, not a quote.

Insured DeliveryShipping shown at checkout
30-Day ReturnsSome exclusions apply
No Sales TaxExcept CA & WY
Price MatchFound it lower? We'll match
Recovery Room Direct specialist

Talk to a Recovery Specialist

1-888-500-5675

Mon–Sat 9am–6pm EST

Schedule a Call

Shipping & Delivery

Shipping for BioLight is calculated at checkout based on your address and the system you order. Parcel items (Shine, ReCharge, ReStore, Beam and the Cocoon) ship by insured ground parcel. Freight systems (ReJuvenate, Arc, Adapt, Apex, Helios and the Aether Chamber) ship palletized by freight carrier. Call (888) 500-5675 before you order and we will confirm your exact shipping cost in writing. BioLight ships directly from its own facility, and our team tracks every order through to delivery — you always deal with us, not the manufacturer.

Parcel delivery — Shine, ReCharge, ReStore, Beam and Cocoon. These ship as standard insured parcel via UPS, FedEx or USPS. Orders are processed within 1–2 business days, and delivery typically takes 3–7 business days from the ship date. No appointment or freight dock is needed. You will receive tracking by email once your order leaves the facility.

Freight delivery — ReJuvenate, Arc, Adapt, Apex, Helios and the Aether Chamber. These are large systems, from 65 lb up to more than 800 lb, and they ship on a pallet by freight carrier. Your Recovery Specialist confirms your delivery window in writing before your order ships, so you know exactly what to plan for. Commercial systems are built and staged to order, and lead times vary by model and configuration — call us before you order and we will confirm the current timeline for your unit.

Preparing for a freight delivery. Standard freight delivery is curbside. Measure doorways, hallways and any turns before delivery day, and have help available — these systems are heavy and are not a one-person carry. If your site needs inside placement, a liftgate, or a scheduled appointment window, tell us before you order and we will arrange what is available for your model.

IMPORTANT — report any damage within 48 hours. BioLight requires damage to be reported within 48 hours of delivery, with photographs. Before you unpack, photograph the outside of the carton or pallet. Then photograph anything damaged inside. On a freight delivery, also note the damage on the delivery receipt before the driver leaves, and do not sign a clean receipt if anything looks wrong. Email the photos to sales@recoveryroomdirect.com and we will handle the claim for you. Reports made after 48 hours may not be accepted.

Missing packages and address accuracy. If tracking shows delivered but nothing arrived, check with neighbours and building management first, then contact us and we will open a carrier trace. Please double-check your address at checkout — orders returned for an incorrect address may incur reshipment charges.

Alaska, Hawaii and outside the contiguous U.S. Not available at standard checkout. Call (888) 500-5675 for a custom quote.

Delivery times are carrier estimates, not guarantees. View our full Shipping & Delivery policy →

Warranty

BioLight covers its devices with a limited warranty against defects in materials and workmanship under normal use. Coverage begins on the original date of purchase and applies to the original purchaser.

5-year limited warranty + 60-day trial period: Adapt System, Apex System, Arc System, Helios System.

3-year limited warranty + 60-day trial period: Aether Chamber, Beam, Cocoon, ReCharge, ReJuvenate, ReStore, Shine.

What's covered. At its discretion, BioLight will either repair the product or replace it with a new or refurbished unit of equal or greater value. A repaired or replaced unit carries the remainder of the original warranty period.

What's not. Misuse, unauthorized repairs, improper storage, normal wear, cosmetic damage, power surges, water or fire damage, and lost or stolen products. The warranty is non-transferable.

Register your device. BioLight may require product registration to activate coverage. We'll send you the link after delivery — it takes two minutes and protects your claim.

Shipping on claims. BioLight covers shipping on verified warranty claims. If a returned unit is inspected and found to be working properly, shipping costs including the return are the customer's responsibility.

How to make a claim. Contact us — as your authorized dealer we handle the claim with the manufacturer for you. Email sales@recoveryroomdirect.com or call (888) 500-5675 with your order number and photos of the issue.

Summary of the manufacturer's warranty. Their official warranty document governs.

Return Policy

If your BioLight purchase isn't the right fit, you have 30 days from the date of delivery to return it. All return communication is handled by our team at Recovery Room Direct — you do not need to contact BioLight yourself.

How to start a return. Call (888) 500-5675 or email sales@recoveryroomdirect.com with your order number. We will issue a Return Authorization (RA) number and full instructions. Do not ship anything back before you have an RA number — deliveries received without one will be refused.

Condition required. Items must be returned in unused, like-new condition in the original packaging with all components, accessories and documentation. Keep the original crate or carton until you are certain you are keeping the unit — freight-class systems cannot be returned safely without it.

What a return costs. A 20% restocking fee is deducted from your refund, and return shipping is the buyer's responsibility. On the large freight systems, return transport is a significant cost — we will give you a realistic figure before you commit, so there are no surprises. If your order shipped free, the original outbound shipping cost is also deducted. Refunds are issued to the original payment method within 5–7 business days of the returned unit being received and inspected.

Talk to us first. Most returns we see could have been avoided with a five-minute conversation about room size, power, or which model actually fits the use. Call before you order — that is what our specialists are for.

Damage on arrival is not a return. If your unit arrives damaged, do not start a return — it is handled as a freight or carrier claim and it costs you nothing. Photograph everything and email us within 48 hours of delivery. See our BioLight Shipping Policy for the steps.

BioLight's 60-day trial. BioLight offers a 60-day trial period on its devices directly. That is a manufacturer program, separate from our 30-day return window. If you are past 30 days and want to explore it, call us and we will contact BioLight on your behalf and tell you honestly what is possible.

Warranty claims are separate. A defect that appears after the return window is covered by the manufacturer's warranty, not a return. See our BioLight Warranty Policy.

View our full Refund Policy →

Price Match Guarantee

Found it for less at an authorized dealer? We'll match it — before or after you buy.

We're factory-authorized for every brand we carry. If you find this exact model listed at a lower price by another authorized retailer, send us the link and we'll match it before you check out. Already purchased? We'll refund the difference within 30 days of your order date.

To claim: Email us or call with a link or screenshot showing the lower price, the retailer name, and model number. We'll confirm authorization status and apply the match — typically same business day.

Applies to authorized U.S. retailers only. Excludes open-box, clearance, used, and bundle pricing. Item must be in stock at the competing retailer.

View our full price match terms

SECURE CHECKOUT
| American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa
Authorized BioLight Dealer — Commercial Systems

BioLight Adapt System: 360° Commercial Red Light Therapy with Customizable Wavelengths

The Adapt System is BioLight’s most configurable commercial platform — a two-component table-and-panel setup delivering 2,000 LEDs of buyer-specified red and near-infrared light from every angle. Designed for med spas, recovery centers, and clinical practices that need full-body coverage with protocol-level precision.

Available as the complete Adapt System, the Adapt Table Only, or the Adapt Panel Only — each configured to your exact wavelength requirements at time of order.

Affirm & Shop Pay financing available at checkout.

BioLight Adapt System — full commercial red light therapy table and panel configuration
2,000 Total LEDs
Table + Panel
620–1,000 nm Customizable
Wavelength Range
80 mW/cm² Panel Irradiance
at 6”
0.1 µT EMF Emission
at 0”

When a facility owner chooses a commercial red light therapy system, the first question is usually coverage — how much of the body, from how many directions, at what dose. The second question is flexibility: will this system still fit your protocols two years from now, as the research evolves and your client base grows? The BioLight Adapt System is the answer to both.

Unlike fixed-wavelength red light therapy devices, the Adapt System lets you specify the exact nanometer targets for both red (620–750 nm) and near-infrared (800–1,000 nm) LEDs at time of order. That means your light bed is tuned to your clinical philosophy before it ships. Paired with pulsing frequency control from 1–9,999 Hz, the Adapt is one of the few commercially available systems capable of running frequency-specific protocols alongside standard continuous-wave sessions.

The table-and-panel configuration eliminates repositioning: clients lie on the Adapt Table while the motorized Adapt Panel — rotating a full 360° — treats from above, beside, or any angle. For a recovery center or med spa, that translates directly into shorter sessions, higher throughput, and a differentiated service offering. Explore the full BioLight product lineup or browse all red light therapy systems to see where the Adapt sits in the broader landscape.


Customizable Wavelengths & Precision Modes

Every Adapt System is built to your specification. Choose your wavelengths, dial in your frequency, and run the protocol your facility needs — without compromise.

Red Light
620–750 nm — Buyer-Specified

Select the precise red wavelength for your protocols at order time. Research suggests red-range photons may support skin-level tissue benefits and surface-layer recovery, according to some studies. Continuous or pulsed delivery available.

Near-Infrared
800–1,000 nm — Buyer-Specified

NIR wavelengths in this range may penetrate more deeply into tissue, according to published photobiomodulation research. Specify your target within the 800–1,000 nm band to align with your facility’s recovery or wellness protocols.

Combined Mode
Red + NIR Simultaneously

Run red and near-infrared LEDs at the same time for broad-spectrum sessions. Intensity is independently adjustable from 1–100% via a front-panel knob, allowing practitioners to weight each spectrum based on session goals.

Pulsing Frequencies
1–9,999 Hz Adjustable

Clinical-grade frequency range covers everything from low-frequency relaxation protocols to high-frequency applications. Practitioners may set specific targets — for example, 40 Hz has been explored in cognitive research contexts — enabling protocol differentiation not available on standard consumer panels.

Getting started: A typical introductory session on the Adapt System runs 10–20 minutes at moderate intensity (50–75%), with the panel positioned above the table for full 360° coverage. As clients acclimate, session duration and intensity may be adjusted based on practitioner protocol. Maintain consistent scheduling — most facilities run 3–5 sessions per week — and document client responses to inform wavelength and frequency refinement over time. Always conduct a client intake screening before initial sessions.

Built for Commercial Performance

Two precision components, one complete system. The Adapt Table and Adapt Panel work together to deliver unmatched coverage and configurability in a clinical or spa environment.

BioLight Adapt Panel — motorized 360-degree rotating commercial red light panel

Motorized 360° Adapt Panel

The Adapt Panel rotates a full 360° on its powered mobile stand, enabling treatment from any angle without asking clients to reposition. At 75” long with 1,000 LEDs and 80 mW/cm² measured at 6”, it delivers consistent coverage across the full body length. Panel weight: 206 lbs.

BioLight Adapt Table — commercial full-body red light therapy treatment table

Commercial-Grade Adapt Table

The Adapt Table supports clients up to 600 lbs on a low 7.7” profile, making entry and exit straightforward for all client populations. Its 1,000 embedded LEDs treat from below at 80 mW/cm² contact irradiance. Table dimensions: 75” x 27” x 7.7” — fits standard treatment room footprints.

BioLight Adapt System comparison — full system versus table-only versus panel-only configurations

Three Configuration Options

Facilities can enter with the complete Adapt System for maximum coverage, or start with the Adapt Table Only or Adapt Panel Only and expand later. Each component is independently operable. See all red light therapy panels to compare the Adapt Panel against other BioLight configurations.


Technical Specifications

Complete verified specifications for the BioLight Adapt System, Adapt Table, and Adapt Panel.

Specification Value
Adapt Table Dimensions 75” x 27” x 7.7”
Adapt Panel Dimensions 75” x 25” x 4” (with powered rotating stand)
Adapt Table Weight 202 lbs
Adapt Panel Weight 206 lbs
Combined System Weight ~408 lbs
Max Client Weight (Table) 600 lbs
LED Count 1,000 LEDs (Table) + 1,000 LEDs (Panel) = 2,000 total
Wavelengths Customizable: Red 620–750 nm, Near-Infrared 800–1,000 nm (buyer-specified at order)
Light Modes Red only | NIR only | Red + NIR combined
Intensity Range 1–100% (adjustable via front-panel knob)
Pulsing Frequencies 1–9,999 Hz
Irradiance — Adapt Table 80 mW/cm² at 0” (100% intensity)
Irradiance — Adapt Panel at 6” 100%: 80 mW/cm²  |  75%: 66 mW/cm²  |  50%: 49 mW/cm²  |  25%: 24 mW/cm²  |  1%: 15 mW/cm²
EMF Emission 0.1 µT at 0”
Light Flicker 1.2% modulation at 60 Hz
Power Consumption (per component) 1,450W (Table and Panel each draw 1,450W)
Electrical Input 100–240VAC 50/60Hz (US/Canada and international compatible)
LED Lifespan 100,000 hours
Warranty 5 years
Return Period See our return policy
Certifications Not published on manufacturer page
Delivery Timeline Contact us and we will confirm your freight lead time before your order ships.
Configurations Available Full Adapt System  |  Adapt Table Only  |  Adapt Panel Only

What’s in the Box

The complete Adapt System ships as two separate freight items. Each component is also available independently.

Adapt Table
75” x 27” x 7.7” — 202 lbs

Adapt Panel with Powered Mobile Stand
75” x 25” x 4” — 206 lbs

Commercial freight delivery. Contact our team at (888) 500-5675 for lead times, white glove installation options, and facility site requirements before ordering.


Frequently Asked Questions

How does the Adapt System compare to other BioLight red light panels?

The Adapt System occupies a different tier than BioLight’s fixed-wavelength panels such as the Arc or Helio models. The key distinction is wavelength customization: standard BioLight panels ship with pre-set nanometer values, while the Adapt allows buyers to specify exact red (620–750 nm) and NIR (800–1,000 nm) wavelengths at time of order. The Adapt is also a two-component system — table plus rotating panel — delivering true 360-degree full-body coverage that single-panel devices cannot replicate. For facilities comparing commercial configurations, browse all red light therapy panels in our lineup.

What wavelengths and light modes does the Adapt System offer?

The Adapt System operates in the red light range (620–750 nm) and near-infrared range (800–1,000 nm). Unlike fixed-wavelength devices, the buyer specifies the exact target nanometer value within each range at time of order — single or multiple wavelengths per spectrum are available. Operating modes include red light only, NIR only, and red + NIR combined. Intensity is adjustable from 1–100% via knob, and pulsing frequencies can be set from 1 to 9,999 Hz. This range enables practitioners to run both standard continuous-wave sessions and frequency-specific protocols from a single device.

What does a typical session look like — duration, frequency, and distance?

Session parameters vary by practitioner protocol and client profile; the following represents general guidance only. Most facilities run introductory sessions of 10–20 minutes at 50–75% intensity, with clients lying on the Adapt Table while the panel is positioned above. The Adapt Panel may be rotated to treat lateral or posterior areas without repositioning the client. For ongoing programs, 3–5 sessions per week is a common starting point, with adjustments made based on client response. For the Adapt Panel used at 6” distance, irradiance ranges from 15 mW/cm² (1% intensity) to 80 mW/cm² (100% intensity). Always consult current photobiomodulation literature and conduct a client intake screening before beginning a protocol.

What facilities is the Adapt System designed for?

The Adapt System is designed for professional facilities integrating full-body red light therapy as a structured treatment service. Target environments include med spas, recovery and performance centers, chiropractic and physical therapy clinics, integrative medicine practices, and any clinical setting where practitioners need protocol-level control over wavelength and frequency. The 600-lb weight capacity, commercial-grade construction, and configurable wavelength ordering make it unsuitable as a consumer device — it is built for high-throughput professional use. The system ships via commercial freight and requires adequate room dimensions and dedicated 100–240VAC electrical supply for each component.

Are there safety considerations or contraindications I should review?

The BioLight Adapt System is a general wellness device and is not intended to diagnose, treat, cure, or prevent any medical condition. As with all photobiomodulation equipment, practitioners should conduct client intake screenings before sessions. General considerations include: clients who are pregnant, have photosensitive conditions, are taking photosensitizing medications, or have active cancer should consult their physician before use. Direct eye exposure to high-intensity LED panels should be avoided; appropriate protective eyewear is recommended. EMF emission is 0.1 µT at 0”. All clinical decisions regarding contraindications should be made by a qualified healthcare professional based on individual client circumstances.

Is Recovery Room Direct an authorized BioLight dealer?

Yes — Recovery Room Direct is an authorized BioLight dealer. Purchasing through an authorized dealer ensures you receive a genuine BioLight Adapt System with the full manufacturer warranty (5 years), a 60-day manufacturer trial period, and direct access to BioLight’s commercial support team. Our recovery specialists can assist with configuration questions, freight coordination, and facility planning before you place your order. Reach us at (888) 500-5675 or browse the complete BioLight collection to compare all available systems.


Authorized Dealer

Official BioLight partner — full warranty & support included

Delivery Details

Freight shipping, calculated at checkout

Financing Available

Affirm & Shop Pay options available at checkout

Recovery Specialists

Expert product guidance, every order

Ready to Bring BioLight Into Your Facility?

Choosing the right commercial red light therapy system comes down to your protocols, your client volume, and your wavelength requirements. The Adapt System is the most configurable option in the BioLight lineup — but if your facility is evaluating other full-body bed systems, explore all red light therapy beds to compare configurations. Our recovery specialists can walk you through the decision before you commit.

✓ Ships to All 48 States ✓ Authorized BioLight Dealer ✓ Affirm & Shop Pay Available ✓ 5-Year Adapt System Warranty
Speak with a Recovery Specialist  •  (888) 500-5675 ⇧ Ready to order? Scroll up to add to cart

Recently Viewed Products