Harvia KIP Sauna Heaters

4.7 · 2,600+ owner reviews across our brands

12 products

Harvia sauna heater with stones in a cedar-lined sauna room
Heater finder Not sure which heater fits?Let's size it right.Up to five steps, then only the heaters that fit.

KIP is the heater that asks for the least: wall mounted at bench height, controls in the casing, and a circuit a small indoor room can usually give it.

Reviews

What Owners Say

4.7 from 2,600+ owner reviews

See all owner reviews

Start here

Harvia KIP Sauna Heaters: Three Outputs, One Decision

The KIP is the most ordinary heater Harvia makes, and that is the reason it sells. Three outputs cover almost every home sauna, the stone load is one box, and the only real decision is where the controls live.

Here is why it matters: a KIP W will not run until a Xenio control is wired to it, so it is really two purchases. Size the room first, read the letter second, then compare prices.

Front view of the Harvia KIP B wall-mounted sauna heater with its built-in control dials
4.5 to 8 kWThree outputs across the family
100 to 425Cubic feet, from Harvia room tables
One 44 lb boxStone the KIP takes, per heater
B or WControls on the heater, or separate

The range

Every Harvia KIP, Output by Output

Room volume comes from Harvia's own tables. Find your room in the middle column, then pick B or W in the section below.

Model Output Room volume Supply Controls
KIP45B 4.5 kW 100 to 210 cu ft 240V single phase On the heater
KIP60B 6 kW 170 to 300 cu ft 240V single phase On the heater
KIP80B 8 kW 250 to 425 cu ft 240V single phase On the heater
KIP45W 4.5 kW 100 to 210 cu ft 240V single phase or 208V three phase Separate Xenio CX170
KIP60W 6 kW 170 to 300 cu ft 240V single phase or 208V three phase Separate Xenio CX170
KIP80W 8 kW 250 to 425 cu ft 240V single phase or 208V three phase Separate Xenio CX170

A large glass door or an uninsulated wall moves you up an output. The B models are 240V single phase only; if your supply is 208V three phase you need a W.

The choice

KIP B or KIP W: Where the Controls Live

Same heater body, same stones, same room sizes. The letter changes one thing, and it is the thing you touch every time you use the sauna.

KIP B, controls on the heater

A thermostat dial and a timer at the base of the casing. Nothing else to buy, nothing else to wire, and nothing on the wall outside. You set it standing at the heater, and the timer runs from there. This is the simplest sauna you can install.

KIP W, separate Xenio CX170

The heater carries no controls. A Xenio CX170 goes on the wall outside the room, and it brings a touchscreen, a delayed start and the MyHarvia app over WiFi. More to install and one more position to plan, and you can start the room from the kitchen.

Close view of the timer and thermostat dials built into the base of the Harvia KIP B
The B models carry a thermostat and a 60 minute timer on the casing, so nothing else goes on the wall.

Before you order

Before You Order a Harvia KIP

The B and W are not the same order. A KIP B needs nothing else to run. A KIP W needs a Xenio CX170 wired to it, mounted outside the sauna, and that is a second purchase and a second wall position. Decide before you compare the two prices.

The circuit comes before the heater

Every 240 volt Harvia heater is hardwired on a dedicated circuit. Harvia publishes rated amperage and a minimum wire size rather than a breaker size, so your electrician sizes it to local code. Get that done while the wiring is still open, not at inspection.

One box of stone, stacked loosely

A KIP takes one 44 lb box of split-face AC3000 stone, and a KIP package includes it. Stack them loosely so air moves between them. The KIP manual asks you to inspect and restack them at least once a year, because stone crumbles with heat.

Staff picks

Which KIP for Your Room

Three picks for the three room sizes the KIP covers. Each one is the package, so the stone is already counted.

100 to 210 cu ft

Harvia KIP45B Package

A small indoor room, a closet conversion, or a one to two person bench. Heater, built-in controls and the box of stone that fills it.

See the KIP45B package

170 to 300 cu ft

Harvia KIP60B Package

The size most home saunas land on. Two cartons, dials on the heater, and one 44 lb box of split-face stone.

See the KIP60B package

250 to 425 cu ft

Harvia KIP80W Package

A larger room, and the one worth starting from your phone. Heater, Xenio CX170 WiFi control and stone.

See the KIP80W package

Questions answered

Harvia KIP Sauna Heaters: Frequently Asked Questions

What is the difference between the Harvia KIP B and KIP W?

The controls. A KIP B has a thermostat and timer built into the casing, so nothing else is needed. A KIP W has no controls on the heater and takes a separate Harvia Xenio CX170, which mounts outside the sauna and adds a touchscreen, delayed start and the MyHarvia app. The heater body, the outputs and the room sizes are the same.

What size Harvia KIP do I need?

Harvia rates the KIP45 for 100 to 210 cubic feet, the KIP60 for 170 to 300, and the KIP80 for 250 to 425. Measure your room in cubic feet, then add for a large glass door or any uninsulated surface, because both pull heat out faster than a lined wall.

How many stones does a Harvia KIP take?

One 44 lb box of Harvia AC3000 split-face stone fills a KIP, and that is what a KIP package includes. Stack them loosely so air can move between them rather than packing them tight.

Does the Harvia KIP need its own circuit?

Yes. Every 240 volt Harvia heater is hardwired on a dedicated circuit, and Harvia's manuals call for a licensed or qualified electrician. Your electrician sizes the circuit from the heater's published amperage and your local code.

Can a Harvia KIP run on 208V three phase?

The W models have a 208V three phase version; the B models are 240V single phase only. They are separate products, not a switch on the same heater, so confirm your supply before ordering.

Is the Harvia KIP suitable for a commercial sauna?

The KIP is built for family use. For a room that runs all day, the Club family is the one designed for the duty cycle. Harvia's warranty terms also differ between family and commercial use, so check them against how the room will actually be used.

Tell us the room and the supply

Give us the room in cubic feet and whether you have 240V single phase or 208V three phase, and we will tell you which KIP fits.